Acewell ACE-2XX User Manual

Download Operation & user’s manual of Acewell ACE-2XX Desktop for Free or View it Online on All-Guides.com.

Brand: Acewell

Category: Desktop

Type: Operation & user’s manual for Acewell ACE-2XX

Pages: 3

Download Acewell ACE-2XX Operation & user’s manual

Acewell ACE-2XX Operation & user’s manual - Page 1
1
Acewell ACE-2XX Operation & user’s manual - Page 2
2
Acewell ACE-2XX Operation & user’s manual - Page 3
3
ATV/Motorcycle Computer
ACE-2XX User Manual
23
6
7
4 5
1
Speed Sensor:
The ACE-2XX can use either a 2 wire hall sensor or a reed sensor
when it is connected to the bike’s power.
FEATURES
Displays speedometer, Trip and odometer and bar-graphic fuel gauge
at the same me.
Built-in 4-6 LED indicators for different applicaons and backlight.
Odometer and total riding mer are always kept in memory.
Metric/Empire unit opons are available.
Adjustable wide wheel circumference seng from 1 to 3999mm.
Fuel gauge includes +/- 100, 250 and 510 Ohm opons for fuel sender
input resistance, as well as “fuel gauge off” mode.
Includes bracket, speed sensor, fing kits and wiring harness.
SPECIFICATIONS
Power Input
Speed Sensor
Wheel circumference setting
Dimensions
DC 9-18V
Reed Sensor or Hall sensor with 2 wires
1mm-3999mm
96.7mm x 53.9mm x 24.5 mm
Function Specifications
Simbolo
Speedometer
2.4-399 km/h
(248 MPH)
0.0-999.9 KM/Miles
Maximum speed 2.4-399 KM/h (248 MPH)
Trip meter 1&2
Riding timer 0-99H59`59``
+/- 100Ω, 250Ω, 500Ω options and Off
Total Riding Time 0-999999H
Odometer
TRIP 1/2
12/24 Hour Clock 0:00`-11H59`/23H59`
RT
Bar-Fuel Gauge
Km/H /
MPH
0- 999999 KM, 0-624999 Miles
ODO
Average speed
AVG
2.4-399 KM/h (248 MPH)
MAX
T T
Reed Speed Sensor and Magnet:
1. This sensor is universal sensor for motorcycle, find a rotang part
to install magnet (for example disk, sprocket or drivesha) and a
locaon to install the sensor where it can be aligned to the magnet.
2. Align the center of the magnet to either of the sensor marking lines
or the side of the sensor.
3. Installing the sensor parallel to the vibraon direcon creates
oponal an-vibraon effect.
4. Make sure the gap between the magnet and the sensor is
within 8mm.
Hall Effective Speed Sensor and Magnet:
1. This is universal sensor for ATV front or rear wheel installaon
or motorcycle front wheel installaon. For some fitments an
accessory speed sensor holder may need to be purchased.
2. Find a rotang part to install magnet (for example disk, sprocket
or drivesha) and a locaon to install the sensor where it can be
aligned to the magnet
3. Align the center of the magnet to center of side face of the sensor.
4. Make sure the gap between the magnet and the sensor is
within 5mm.
Specific Hall sensors:
Cable drive adaptors for most bikes originally fied with cable
driven speedometers or milemeters are available. When using these
cables it is necessary to divide the circumference seng by the
number of rotaons of the cable per rotaon of the wheel.
Thanks for purchasing this ATV/Motorcycle/Scooter computer; this manual is designed for ACE-2XX series. Each model has 4-6 LED indicators.
Different model has different LED indicators. You may found above photo has different LED indicators from your computer; the photo above is for reference only.
PANEL DESCRIPTIONS
1. 1 row: Speedometer
2. 2 row: Trip 1&2, RT, AVG
3. 3 row: ODO, TT, MAX
4. RESET Buon
5. MODE Buon
6. Fuel Gauge
7. LED Indicators
st
nd
rd
Left-Direction Indicator/Green
Main-Beam Headlamp/Blue
Right-Direction Indicator/Green
Hazard Warning/ Red
Direction Indicator/Green
Engi ne Oil / Red
Neutral Gear /Green
Reverse Gear /Red
R
N
Max. 8mm
Vibration Direction
sensor
Max. 8mm
Vibration Direction
sensor
Max. 8mm
INSTALLATION
Rubber Pad
Washer
Spring Washer
Fixing Screw Nut
Main Unit Mounting
Main Unit
Mounng
English
10R-039949