Dayton 3VE56A Operating Instructions & Parts Manual

Download Operating instructions & parts manual of Dayton 3VE56A Gas Heater for Free or View it Online on All-Guides.com.

Brand: Dayton

Category: Gas Heater

Type: Operating instructions & parts manual for Dayton 3VE56A

Pages: 12

Download Dayton 3VE56A Operating instructions & parts manual

Dayton 3VE56A Operating instructions & parts manual - Page 1
1
Dayton 3VE56A Operating instructions & parts manual - Page 2
2
Dayton 3VE56A Operating instructions & parts manual - Page 3
3
Dayton 3VE56A Operating instructions & parts manual - Page 4
4
Dayton 3VE56A Operating instructions & parts manual - Page 5
5
Dayton 3VE56A Operating instructions & parts manual - Page 6
6
Dayton 3VE56A Operating instructions & parts manual - Page 7
7
Dayton 3VE56A Operating instructions & parts manual - Page 8
8
Dayton 3VE56A Operating instructions & parts manual - Page 9
9
Dayton 3VE56A Operating instructions & parts manual - Page 10
10
Dayton 3VE56A Operating instructions & parts manual - Page 11
11
Dayton 3VE56A Operating instructions & parts manual - Page 12
12
Form 5S4859
Printed in Korea
09663
0605/263/VCPVP
PIN003
05/05
®
Dayton
®
Natural Gas
Construction Heater
Operating Instructions & Parts Manual 3VE56A
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Description
Dayton model 3VE56A is a natural gas fired construction heater, having a built-
in thermostat, and a 150,000 BTU/Hr rating. The heater uses natural gas for com-
bustion and electricity to operate the motor and fan. It is primarily to be used to
temporarily heat well-ventilated buildings under construction, alteration or repair.
This heater should be utilized in sheltered, well-ventilated areas, but never in
occupied dwellings.
Specifications
Output Rating Fuel Hot Air Output Electric Motor
Model BTU/Hr Fuel Consumption (CFM Approx) Motor Input Amperage
3VE56A 150,000 Natural Gas Only 150 Cubic Ft/Hr 435 3580 RPM 120V/60Hz, 1/9 HP 0.8
Manifold Maximum Supply Minimum Supply Temperature
Model Pressure Pressure to Heater Pressure to Heater Control
3VE56A 3.3” W.C. 1/2 PSI 5” W.C. Built-In Thermostat
Weight Size
Model Ignition (Pounds) L x W x H (Inches)
3VE56A Direct spark 24 (Heater) 25.1 x 8.9 x 15.9
35 (Shipping)
Table of Contents Page
Description
1
Specifications
1
Unpacking
1
General Safety Information
1-3
Principals of Operation
3
Ventilation
3
Installation
4
Operation
4
Maintenance
4-5
Storage
5
Wiring Diagram
6
Troubleshooting Chart
7
Repair Parts Illustration
8
Repair Parts List
9
Warranty
12
Unpacking
1. Unpack all materials used to protect
the heater inside of carton. Retain
plastic caps attached to exposed
fittings for use during storage.
2. Remove heater, accessories and all
hardware from carton.
3. Inspect all items for damage that may
have occurred during shipment. If
there is any damage, promptly inform
the local Grainger branch where you
purchased heater.
General Safety Information
Make certain you read and understand
all warnings. Keep these instructions for
reference. They are your guide to safe
and proper operation of this heater.
Safety information appears throughout
these instructions. Pay close attention to
them. Below are definitions for the
safety information listed throughout
this manual.
Indicates an im-
minently hazardous
situation which, if not avoided, WILL
result in death or serious injury.
Indicates a poten-
tially hazardous
situation which, if not avoided, COULD
result in death or serious injury.
Indicates a poten-
tially hazardous
situation which, if not avoided, MAY
result in minor or moderate injury.
IMPORTANT: Not every possible cir-
cumstance that might involve a hazard
can be anticipated. The warnings in this
manual and on tags or decals affixed to
the unit are therefore not all-inclusive.
If a procedure, work method, or oper-
ating technique not specifically recom-
mended by Dayton is used, you must
make sure it is safe for you and others.
You should also ensure that equipment
will not be damaged or made unsafe by
the operating or maintenance method
you choose.
Consumer: Retain this manual for future
reference.
Figure 1 – Model 3VE56A