Billy Goat FM3301 Operator Owner's Manual

Download Operator owner's manual of Billy Goat FM3301 Lawn Mower for Free or View it Online on All-Guides.com.

Brand: Billy Goat

Category: Lawn Mower

Type: Operator owner's manual

Model: Billy Goat FM3301 , Billy Goat FM3301E

Pages: 20 (1.12 Mb)

Download Billy Goat FM3301 Operator owner's manual

Billy Goat FM3301 Operator owner's manual - Page 1
1
Billy Goat FM3301 Operator owner's manual - Page 2
2
Billy Goat FM3301 Operator owner's manual - Page 3
3
Billy Goat FM3301 Operator owner's manual - Page 4
4
Billy Goat FM3301 Operator owner's manual - Page 5
5
Billy Goat FM3301 Operator owner's manual - Page 6
6
Billy Goat FM3301 Operator owner's manual - Page 7
7
Billy Goat FM3301 Operator owner's manual - Page 8
8
Billy Goat FM3301 Operator owner's manual - Page 9
9
Billy Goat FM3301 Operator owner's manual - Page 10
10
Billy Goat FM3301 Operator owner's manual - Page 11
11
Billy Goat FM3301 Operator owner's manual - Page 12
12
Billy Goat FM3301 Operator owner's manual - Page 13
13
Billy Goat FM3301 Operator owner's manual - Page 14
14
Billy Goat FM3301 Operator owner's manual - Page 15
15
Billy Goat FM3301 Operator owner's manual - Page 16
16
Billy Goat FM3301 Operator owner's manual - Page 17
17
Billy Goat FM3301 Operator owner's manual - Page 18
18
Billy Goat FM3301 Operator owner's manual - Page 19
19
Billy Goat FM3301 Operator owner's manual - Page 20
20
Part No. 520187 Form No. F102004A
Use only a quali ed mechanic for any
adjustments, disassembly or any kind
of repair .
WARNING: TO AVOID PERSONAL INJURY,
ALWAYS TURN MACHINE OFF, MAKE SURE
ALL MOVING PARTS COME TO A COM-
PLETE STOP.
17
MAINTENANCE
RECONNECT SPARK PLUG WIRE,
AND ALL GUARDS BEFORE STARTING
ENGINE.
DISCONNECT SPARK PLUG WIRE
BEFORE SERVICING UNIT.
Note: Blade, blade brake puck, transaxle brake, and drive belts are normal wear items. These should be
inspected on a regular basis and replaced if worn.
Engine (See Engine Manual)
Check for excessive vibration
Inspect for loose parts
Maintenance Operation
Follow these hourly maintenance
intervals.
Maintenance Schedule
Inspect for worn/damaged parts
Every
Use
Every 50
hrs
Every 5 hrs
or (Daily)
Every 25
hrs
Sharpen Blade
Inspect belts for wear
Replace blade and traction belts
MAINTENANCE HISTORY
Service Performed
Date of Service
Every
200-250 hrs
Grease caster pivots and lubri-
cate height adjustment spacers
Lubricate pivot points of all
three control levers
Page 10 of 20
ADJUST ALL BELT TENSIONS AFTER FIRST 5 HRS. OF USE TO PROLONG THE LIFE OF BELTS.
Check brake puck
Check parking brake
Check tire pressure
NOTE: in ate to mfr.s speci ca-
tion as shown on tire side-wall
WARNING: FOLLOWING ENGINE OIL
CHANGE BE SURE OIL DRAIN VALVE IS
CLOSE & TWIST LOCKED.