Dayton 1VNW9A Operating Instructions Manual
Download Operating instructions manual of Dayton 1VNW9A Heater for Free or View it Online on All-Guides.com.
1
2
3
4
5
6
7
8
9
10
11
12
E
N
G
L
I
S
H
E
S
P
A
Ñ
O
L
F
R
A
N
Ç
A
I
S
Dayton
®
Ceramic Heater
Operating Instructions 1VNW9A
P
lease read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
P
rotect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
p
roperty damage! Retain instructions for future reference.
Description
Dayton ceramic heaters are safe and powerful heaters, designed to add
supplemental heat to a room after a few minutes of operation. Ceramic heating
technology, combined with designed overheat protection is an excellent system for
safely heating whole rooms, while saving on heating bills.
This ceramic heater includes an overheat protection system that consists of a safety
tip-over switch, an overheat thermal cut off protector, all designed to ensure
your safety.
Figure 1
Figure 2 – Features
Please read these operation
instructions before using your new
Dayton heater.
Specifications
Model . . . . . . . . . . . . . . . . . . . 1VNW9A
Voltage . . . . . . . . . . . . . . . 120 V, 60 Hz
Current . . . . . .Max. continuous draw:
12.5 amps
Minimum draw (fan only):
0.2 amps
Output . . . . . . . . . . . . . 5120 BTUs/hour
Power . . . . . . . . . . . . . . Low: 650 Watts
Medium: 1000 Watts
High: 1500 Watts
Plug type. . . . . . . . . . . . . . NEMA 1-15P
Dimensions of unit (in.):
H x W x L . . . . . . . . . . . . 8.7 x 8.7 x 11.4
Features
A.“Cool Touch” Cabinet
B. Power and Settings Control
C. Power Indicator Light
D.Thermostat Control
E. Washable Dust Filter and Clip
F. Handle
Special Features
Power Indicator Light – When the unit
is turned ON, the power indicator light
will illuminate to tell you that the
heater is functioning.
Safety Tip-Over Switch
– Your heater is
designed to automatically shut-off
when tipped over. When returned to
normal upright position, heat will
automatically resume.
Auto Overheat Shut-Off Protection
System – Your heater includes a
thermal cut-off protection system that
shuts off the heater if it overheats for
any reason. To reset the heater, turn it
OFF, unplug it from the electrical
outlet, and wait five to ten minutes for
the unit to cool.
NOTE: There may be a trace of smoke
or odor when the unit is first operated.
Do not be alarmed. This indicates a
Form 5S6895
Printed in China
09663
1106/308/VCPVP
PUC006
06/11
A
C
B
F
E
D