BINATONE ICARUS 200 SYSTEM User Manual
Download Operation & user’s manual of Binatone ICARUS 200 SYSTEM Battery Charger for Free or View it Online on All-Guides.com.
Brand: Binatone
Category: Battery Charger
Type: Operation & user’s manual
Model: Binatone ICARUS 200 SYSTEM , Binatone ICARUS 2000
Pages: 2 (2.14 Mb)
Download Binatone ICARUS 200 SYSTEM Operation & user’s manual
1
2
4 USING YOUR PHONE
4.1 Make a Call
4.1.1 Preparatory Dialing
Enter the phone number and press <TALK ON> to connect to the line and dial
the number. When entering the number, if you make a mistake, press <C>
to delete digits.
4.1.2 Direct Dialing
Press <TALK ON> to connect to the line and then enter
4.1.3 Call from the phonebook
Press <MENU> and <UP/DOWN>
<UP/DOWN> to
Press <TALK ON> to dial out the selected phonebook entry.
(Note: if you enter a wrong digit you cannot correct it with the <C> key.)
phonebook entry.
4.1.4 Call from the Call List (only available with Caller Display)
Press <UP> to access the Call List and press <UP/DOWN> to select the desired
Press <TALK ON> to dial out the selected Call List entry.
Note: You can also access the Call List by pressing <MENU/OK> twice.
4.1.5 Call from the redial list
Press <DOWN> to access the redial list and press <UP/DOWN> to select the
Note: The alphanumeric keys provide a short-cut to find entries beginning with
the corresponding letters.
Call List entry.
desired redial number.
Press <TALK ON> to dial out the selected redial number.
4.1.6 Call timer
Your handset automatically times the duration of every call.
The call timer is displayed 15 seconds after dialling, and remains on the screen
for 5 seconds after the end of the call.It is shown in hours, minutes and seconds
4.2 Answer a Call
If the handset is not on the charging cradle:
When the phone rings, press <TALK ON> to answer a call.
Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or
charger will answer the call automatically, and no buttons need to be
Note: You can also access the Redial List by pressing the <REDIAL> key.
format (HH:MM:SS).
4.3 End a Call
During a call press <TALK OFF> to end the call.
OR
Put the handset on the base station or charger to end the call.
12
11
pressed.
13
4.4 Adjust Earpiece Volume
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece
During a call:
Press <UP/DOWN> to select volume 1-5. The current setting is shown.
When you end the call, the setting will remain at the last selected level.
4.5 Mute a Call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press <C> to mute the microphone and “MUTED” will display on the LCD.
Your caller cannot hear you. Press <C> again to unmute the microphone.
4.6 Set the Silent Mode
In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER
OFF”
to choose from for the earpiece volume.
icon is displayed on the LCD.
4.7 Turn on the Keypad Lock
In idle, press and hold <STAR/*> to turn on the keypad lock. The “KEYPAD
4.8 Redial the last number
You can redial any of the 5 last numbers called. If you have stored a name in
the phonebook to go with the number, the name will be displayed instead.
4.8.1 Redial a Number from the Redial List
1. In idle mode, press <DOWN> to access the redial list.
Note: If the redial list entry shows a name, press <Hash/#> to view the number
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK ON> to dial to the selected redial number.
Note: If there are no numbers in the redial list, the display shows
“
EMPTY
”
.
4.8.2 Store a Redial Number into the Phonebook
1. Follow Steps 1 and 2 in section 4.8.1
.
2. Press <MENU> and <UP/DOWN> to select ADD TO PB.
3. Press <OK> and then enter the name you want to use in the phonebook.
4. Press <OK> and then modify the number, if necessary.
5. Press <OK> to show <MELODY 1>.
6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will
be played when browsing the ringtone list. (Note: the selected melody will
7. Press <OK> to confirm, and the entry will be stored.
Note: The display will still flash the Call icon and show CALL or the Caller Display
number, when there is an incoming call, even if the ringer is turned off.
To turn the ringer back on, press and hold <HASH/#> again.
Note: You can still use <TALK ON> to answer a call when the handset is ringing.
To turn the keypad lock off, press and hold <STAR/*> again.
only be played if you subscribe to Caller Display and the incoming number
icon is displayed on the LCD.
The most recent last number will display at the top of the redial list.
of this entry.
matches the
stored number.)
4.8.3 Delete a Redial Number
1. Follow Steps 1 and 2 in section 4.8.1.
2. Press <MENU> and <UP/DOWN> to select DELETE.
3. Press
<OK> to confirm, and the entry will be deleted.
4.9 Find the Handset
You can locate the handset by pressing <PAGE> on the base station. All the
handsets registered to the base will produce the paging tone and show
4.8.4
Delete the Entire Redial List
1. Follow Steps 1 and 2 in section 4.8.1.
2. Press <MENU> and <UP/DOWN> to select DELETE ALL
3. Press <OK> to display <CONFIRM?>.
4. Press <OK> to confirm. All entries will be deleted and the display will show
<EMPTY>.
<TALK OFF> /<C> on any handset or <PAGE> on the base again.
Note: If there is an incoming call during paging, the phone will ring with the
4.10 Make an Internal Call (For Multi-handset Versions Only)
This feature is only applicable when there are at least two registered handsets.
It allows you to make internal calls, transfer external calls from one handset to
incoming call instead of paging.
LOCK”
"PAGING" on the display. You can stop the paging by pressing <TALKON>/
another handset and make conference calls. If the called handset is not in
answered with 60 seconds, the called handset will stop ringing and the calling
Note: If only one handset is registered to the base station, when <C/MUTE/INT>
is pressed, it will display “NOT POSSIBLE”
4.10.1
Intercom Another Handset
1. In idle mode, press <C/MUTE/INT>
and all the other registered handset
2. Enter the number of the handset that you want to call, or enter "9" to call all
3. The called handset rings and <TALK ON> must be pressed on that handset
Note: If only two handsets are registered to the base station, pressing
<C/MUTE/INT> will call the other handset immediately.
numbers will display, along with a "9".
to establish the intercom call.
4.10.3 Transfer an External Call to another handset
During an external call:
1. Press <MENU> and <UP/DOWN> to select INTERCOM
.
2.
Press <OK> to show all the other registered handset numbers, plus "9".
3. The external call is put on hold automatically and the called handset rings
.
4. Press <TALK ON> pressed on that handset on the on the called handset to
Enter the number for the handset you
want to transfer the call to.
handset will return to
standby mode.
handsets.
5. Press <TALK OFF> on the calling handset or put the calling handset on the
charging cradle to end the current call with the external party.
6. The external call is transferred to the called handset.
4.10.2 Call All Handsets
1. In idle mode, press <C/MUTE/INT> and the registered handsets will display.
2. Press <KEY 9> to ring to all registered handsets
4.10.4 Make a 3
-
way Conference Call
The conference call feature allows one external call to be shared with two
handsets (in intercom).
The three parties can share the conversation and no additional network
subscription is required.
14
During an external call:
1.
Follow Steps 1 to 4 in section 4.10.3.
2. Press and hold <STAR> on the calling handset to establish the conference call
Either handset can exit the conference by pressing <TALK OFF>, leaving the
other handset still connected to the
external call.
5 PRIVATE PHONEBOOK
Each handset can store up to 20 private phonebook entries with names and
numbers. Each phonebook entry can have a maximum of 20 digits for the
phone number and 12 characters for the name. You can also select different
ringtones for your phonebook entries. (Note: the different ringtones only play if
5.1 Add a New Phonebook Entry
In idle:
PHONEBOOK and then press
<OK> to access the phonebook.
2. Press <MENU> to show ADD.
3. Press <OK> and then enter the name.
4. Press <OK> and then enter the number.
5. Press <OK> and <UP/DOWN> to select the desired ringtone for your
6. Press <OK> to store the phonebook entry.
you subscribe to Caller Display and
the incoming number matches the stored
number.) Phonebook entries are stored alphabetically by name.
phonebook entry.
5.2 Search a Phonebook Entry
In idle:
2. Enter the first letter of the name using the alphanumeric keys, and then
<UP/DOWN> to scroll to the entry you
want.
5.3 View a Phonebook Entry
In idle:
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU> and <UP/DOWN> to select VIEW.
4. Press <OK> and <UP/DOWN> to review the name, number and ringtone
of the selected phonebook entry.
Note: If the number is more than 12 digits, press <LEFT SOFT KEY> or
<RIGHT SOFT KEY> to view the remaining digits.
15
16
The maximum range between the base station and the handset is approximately
300 meters. Depending on the surrounding conditions as well as spatial and
struct ural factors, the range may be reduced.
2 INSTALLING YOUR PHONE
2.1 Connecting the base station
1) Plug the power supply
& line cord into
2) Plug the power adapter into a 230Vac,
3) Always use the cables provided in the box
Warning: Use only the provided adaptor, using
other power supplies may cause a hazard.
Warning: The power adaptor should be installed
and the line cord into your telephone line socket.
the base station.
50Hz mains socket,
The range indoors is normally less than outdoors, typically being up to 50 meters.
near the equipment and should be easily accessible.
Triple
• 3 Handsets
• 1 Base station
• 1 Mains power adapter
• 1 Telephone line cord
• 6 rechargeable batteries
• 1 User manual
• 2 Charger pods with
connected mains
power adapters
• 4 Handsets
• 1 Base station
• 1 Mains power adapter
• 1 Telephone line cord
• echargeable batteries
• 1 User manual
• 3 Charger pods with
connected
mains power adapters
Quad
8 r
2.2 Installing and charging the batteries
1) Place the 2 batteries as indicated, ensuring their
2) Slide the battery compartment cover back.
3) Put the handset on the base and charge for
15 hours first time. A beep indicates that the handse
polarity is correct.
is properly placed on the base or cha
rger.
In a home with broadband, every telephone must have a micro-filter connected,
not just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband supplier.
3 GETTING TO KNOW YOUR PHONE
3.1 Handset Overview
6
3.2 Base Station Overview
1. PAGE
Press the Page button on the base station to
page your handset(s).
It will ring for approximately 60 seconds.
2. CHARGING CRADLE
1
2
3.3 Display Icons and Symbols
The LCD display gives you information on the current status of the telephone.
Scroll up / down the menu items / Phonebook list / Redial list / Call List
Steady when the handset is in range of the base. Flashes when out of
Steady when an intercom call is in progress.
Flashes when there is an incoming internal call.
Indicates a call is in progress on that handset.
Indicates that the ringer is switched off.
Steady when an alarm is set. Flashes when the alarm is sounding.
Indicates that the keypad is locked.
Indicates when you have a new Voice Mail message.
(This is a Caller Display service and is not usually available from
range of the base or not registered to the base.
UK network providers.)
Indicates when the battery is fully charged.
Whole icon flashes when the battery performs charging.
Internal block icon flashes when the battery is in final charging stage.
Indicates when the battery needs charging.
Flashes when low battery power level is detected.
7
5
If you have a
Broadband line
If you connect your telephone to a line with
insert a micro-filter between the telephone
and the telephone line, otherwise you may get
interference between the telephone and the broadband,
which could cause problems.
a broadband connection, you will need to
Use only NiMH rechargeable batteries.
(BACK)
(INT)
Indicates when there are more characters or numbers in front of those
Indicates when there are more characters or numbers after those being
Press the MENU/OK key to access the main menu.
Press the MENU/OK key to confirm the current selection.
Indicates new TAM message / new call in TAM message list / call list.
Press the C/MUTE key to start an intercom call.
Press the C/MUTE key to go back to the previous menu level or cancel
Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute
being
displayed.
displayed.
the current action.
the during a call.
3.4 Menu Structure
In idle mode, press <MENU/OK> to access the Call List menu. Refer to the
following for the menu structure.
Main
Menu
CALL LIST
BS
SETTINGS
HS
SETTINGS
REGISTRATION DEFAULT
Sub
menu
Review
Call List
Under a
selected Call
List entry:
ADD TO PB
DELETE
DELETE ALL
DETAILS
Review
phonebook
list Under a
phonebook
entry:
ADD
VI
EW
EDIT
DELETE
DELETE ALL
PB STATUS
DELETE HS
DIAL MODE
FLASH TIME
CHANGE PIN
ALARM
RING SETUP
TONE SETUP
LANGUAGE
RENAME HS
HS DISPLAY
AUTO ANSWER
DATE & TIME
<MENU>
<UP/
DOWN>
<UP/
<UP/DOWN>
DOWN>
<UP/
DOWN>
<UP/
DOWN>
Key Press
PIN? - - - -
<UP/
DOWN>
PHONEBOOK
PIN? - - - -
8
9
3.5 Text and Digit Entry Table
The following table shows you where each letter and punctuation character can
be found, by using repeated presses of the alphanumeric keypad. This will be
helpful when storing a name in the
phonebook and renaming your handset.
In editing mode, a cursor is displayed to indicate the current text entry position.
It is positioned at the right of the last character entered.
Writing Tips:
1. Once a character is selected, the cursor will move to the next position after a
short pause.
2. You can move the cursor within the text with the <UP/DOWN> keys to
amend the text entry.
3. Press <C> to delete the last character.
4. Press and hold <C> to delete the entire text string.
3.5.1 Latin Character Set
Key
Press
1st 2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1 space - 1 1
2 A B C 2 2
3
D E F 3 3
4 G H I 4 4
5 J K L 5 5
6 M N O 6 6
7 P Q R S 7 7
8 T U V 8 8
9 W X Y Z 9 9
0 0 0, or P (Pause) if press and hold
*
*
? / \
( ) *
# #
‘
,
-
.
#
Alphanumeric Editing
(For phonebook name editing and renaming handset )
Number Editing (For phone
number editing,date/time editing)
10
THIS EQUIPMENT IS NOT DESIGNED FOR MAKING
EMERGENCY TELEPHONE CALLS WHEN THE POWER
FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE
MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.
Before operating this set,
please read these instructions carefully.
TABLE OF CONTENTS
1 2
1
IMPORTANT SAFETY INSTRUCTIONS
........................................................... 4
2
INSTALLING YOUR PHONE
............................................................................
2.1 CONNECTING THE BASE STATION..........................................................................
2.2
INSTALLING AND CHARGING THE BATTERIES......................................................
3
GETTING TO KNOW YOUR PHONE
................................................................ 7
3.1 HANDSET OVERVIEW ................................................................................................ 7
3.2 BASE STATION OVERVIEW .....................................................................................
3. DISPLAY ICONS AND SYMBOLS............................................................................... 8
3. M
ENU STRUCTURE ....................................................................................................
3. T
EXT AND DIGIT ENTRY TABLE................................................................................ 10
3.5.1
HARACTER SET .........................................................................................
4
USING YOUR PHONE
......................................................................................1
4.1 MAKE A CALL .............................................................................................................1
4.1.1 PREPARATORY DIALING .........................................................................................1
4.1.2 DIRECT DIALING .......................................................................................................1
4.1.3 CALL FROM THE PHONEBOOK ...............................................................................12
4.1.4 CALL FROM THE CALL LIST..................................................................................... 1
4.1.5 CALL FROM THE REDIAL LIST(ONLY AVAILABLE WITH CALLER DISPLAY) ...... 1
4.1.6
CALL TIMER .............................................................................................................. 1
4.2
ANSWER A CALL ....................................................................................................... 1
4.3
END A CALL ................................................................................................................13
4.4
ADJUST EARPIECE VOLUME.................................................................................... 1
4.5 MUTE A CALL ............................................................................................................. 1
4.6 SET THE SILENT MODE ............................................................................................. 1
4.7 TURN ON THE KEYPAD LOCK................................................................................... 1
4.8
REDIAL THE LAST NUMBER ..................................................................................... 1
4.8.1 REDIAL A NUMBER FROM THE REDIAL LIST......................................................... 1
4.8.2 STORE A REDIAL NUMBER INTO THE PHONEBOOK............................................ 1
4.8.3
DELETE A REDIAL NUMBER ....................................................................................1
4.8.4 DELETE THE ENTIRE REDIAL LIST .........................................................................1
4.9
FIND THE HANDSET................................................................................................... 1
4.10 MAKE AN INTERNAL CALL(FOR MULTI-HANDSET VERSIONS ONLY ) ................ .1
4.10.1
INTERCOM ANOTHER HANDSET ..........................................................................1
4.10.2
CALL ALL HANDSETS .............................................................................................1
4.10.3
TRANSFER AN EXTERNAL CALL TO ANOTHER HANDSET ................................1
4.10.4 MAKE A 3-WAY CONFERENCE CALL ....................................................................1
5
PRIVATE PHONEBOOK...................................................................................1
5.3 VIEW A PHONEBOOK ENTRY ...................................................................................1
5.4
EDIT A PHONEBOOK ENTRY ....................................................................................1
5.5
DELETE A PHONEBOOK ENTRY ..............................................................................1
5.6 DELETE THE ENTIRE PRIVATE PHONEBOOK........................................................1
5.7
CHECK THE PHONEBOOK USAGE ..........................................................................1
6
CALLER DISPLAY (NETWORK DEPENDENT)
...............................................18
6.1 VIEW THE CALL LIST .................................................................................................1
6.2
STORE A CALL LIST NUMBER INTO THE PHONEBOOK........................................1
6.3
DELETE AN ENTRY IN THE CALL LIST.................................................................... 1
6.4 DELETE THE ENTIRE LIST OF THE CALL LIST .......................................................1
7
PHONE SETTINGS
...........................................................................................2
7.1
DATE AND TIME SETTINGS ...................................................................................... 20
7.1.1
CHANGE THE DATE FORMAT ................................................................................. 20
7.1.2 CHANGE THE TIME FORMAT .................................................................................. 20
7.1.3
SET THE TIME ...........................................................................................................
7.1.4
SET THE DATE ..........................................................................................................20
7.2
ALARM SETTINGS......................................................................................................
7.2.1
TURN ON/OFF THE ALARM ..................................................................................... 21
7.2.2
SET THE ALARM TIME ............................................................................................. 21
7.3
HANDSET SETTINGS .................................................................................................
7.3.1
SET THE RINGER RINGTONE FOR INTERNAL CALLS .........................................
7.3.2
SET THE RINGER MELODY FOR EXTERNAL CALLS ............................................
7.3.3
SET THE RINGER VOLUME .....................................................................................
7.3.4 SET ALERT TONES...................................................................................................
7.3.5
SET THE HANDSET LANGUAGE .............................................................................
7.3.6 RENAME THE HANDSET ..........................................................................................
7.3.7 CHOOSE THE INFORMATION TO BE DISPLAYED IN IDLE ...................................
7.3.8 SET THE AUTO ANSWER ........................................................................................
7.4 BASE SETTINGS ........................................................................................................ 23
5.1 ADD A NEW PHONEBOOK ENTRY ...........................................................................1
5.2 SEARCH A PHONEBOOK ENTRY..............................................................................1
3
4
5
TROUBLESHOOTING
...................................................................................
CLEANING AND CARE
................................................................................
1
DECLARATION OF CONFORMITY
. .............................................................
11
GUARANTEE AND SERVICE
......................................................................
11.1
WHILE THE UNIT IS UNDER GUARANTEE ............................................................
11.2
AFTER THE GUARANTEE HAS EXPIRED
..............................................................
3
1 IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury, including the
1) Read and understand all the instructions.
2) Follow all warnings and instructions marked on the product.
3) Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4) Do not use this product near water (for example, near a bath tub, kitchen
sink, swimming pool).
5) Do not overload wall outlets and extension cords as this can result in the risk
of fire or electric shock.
6) Unplug this product from the wall outlet and refer servicing to our Repair
• When the power supply cord or plug is damaged or frayed.
• If the product does not operate normally by following the operating instructions.
•
If the product has been dropped and the cabinet has been damaged.
•
If the product exhibits a distinct change in performance.
7) Unless it is an emergency, avoid using the telephone during an electrical
storm.There may be a remote risk of electric shock from lightning.
8) Do not use the telephone to report a gas leak in the vicinity of the leak.
9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation
periods for the handsets are only applicable with the default battery capacities
10) The use of other battery types or non-rechargeable batteries/primary cells
can be dangerous. These may cause interference and/or damage to the unit
or surroundings. The manufacturer will not be held liable for damage arising
from such non-compliance.
11) Do not use third party charging bays. Damage may be caused to the batteries.
12) Please ensure the batteries are inserted in the correct polarity.
13) Dispose of batteries safely. Do not immerse them in water, burn them, or put
Package contents
The package contains the following items:
Single
• 1 Handset
• 1 Base station
• 1 Mains power adapter
• 1 Telephone line cord
• 2 rechargeable batteries
• 1 User manual
Twin
• 2 Handsets
• 1 Base station
• 1 Mains power adapter
• 1 Telephone line cord
• 4 rechargeable batteries
• 1 User manual
• 1 Charger pod with a connected
mains power adapter
them
where they could get
punctured.
Centre under the
following conditions:
4
following:
TECHNICAL DETAILS
Standard
Frequency range
Channel bandwidth
Operating range
Operating time
Temperature range
Electrical power
Digital Enhanced Cordless
Telecommunication (DECT)
1.88 to 1.9 GHz
1.728 MHz
Up to 300m outdoors;
up to 50m indoors
Standby: 100 hours
Talking: 10 hours
Battery charge time:15 hours
Operating 0 C to 40 C
Storage -20 C to 60 C
HANDSET 500mAH NiMH
(bandwidth = 20 MHz)
1.2V rechargeable battery x 2, AAA size.
Base UNIT input 230V AC 50Hz ,
output 6VDC 200mA.
CHARGER POD input 230V AC 50Hz
output 6V DC 200mA.
Port specification
The port (connect to the mains power supply) is a
SELV port with respect to EN41003.
The port (connected
to the telephone
line) is a
TNV port
respect to EN41003.
with
3.5.
3.5.
2 PHLISH CHARACTER SET......................................................................................
3
11
NORWEGIAN CHARACTER SET............................................................................ 11
3.5. 11 4 GREEK CHARACTER SET .....................................................................................
LATIN C
7.4. D
E-REGISTER A HANDSET ..................................................................................... 23
7.4. C
HANGE THE DIAL MODE .......................................................................................
7.4. C
HANGE THE FLASH (RECALL)TIME .....................................................................
7.4. CHANGE THE SYSTEM PIN CODE ......................................................................... 24
7.5
REGISTRATION .......................................................................................................... 25
7.6
RESET YOUR PHONE ................................................................................................ 25
24
24
1
2
3
4
USER GUIDE
Digital Cordless Telephone
Icarus 200
5.4 Edit a Phonebook Entry
In idle:
2. Press <UP/DOWN> to select the desired phonebook entry.
8
0
9
26
27
27
29
29
29
to select PHONEBOOK and then press <OK>
to access the phonebook and press
select the desired
1. Press <MENU> and <UP/DOWN> to select
PHONEBOOK and then press
<OK> to access the phonebook.
1. Press <MENU> and <UP/DOWN> to select
PHONEBOOK and then press
<OK> to access the phonebook.
1. Press <MENU> and <UP/DOWN> to select
3.5.
Key
Press
1st 2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1 SP - 1 1
2 A B 2 2
3
E 3 3
4 H I 4 4
5 K 5 5
6 6 6
7 7 7
8 8 8
9 9 9
0 0 0, P (Pause)
*
*
# #
Alphanumeric Editing
(For phonebook name editing and renaming handset)
Number Editing (For phone
editing, date/time editing)
Γ
Δ Ζ
Θ
Λ Μ
Ν Ξ Ο
Π Ρ Σ
Τ Υ Φ
Χ Ψ Ω
2
Polish Character Set
3.5.3
Norwegian Character Set
3.5.4
Greek Character Set
PHONEBOOK and then press
<OK> to access the phonebook.
1. Press <MENU> and <UP/DOWN> to select
6
6
6
8
9
10
2
2
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
5
5
5
5
6
6
6
7
6
7
7
7
8
8
9
9
0
20
21
21
21
22
22
22
22
23
23
23
the phone number.
establish an internal call.
Key
Press
1st 2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1 SP - 1 1
2 A B C 2 2
3
D E F 3 3
4 G H I 4 4
5 J K L 5 5
6 M N O 6 6
7 P Q R S 7 7
8 T U V 8 8
9 W X Y Z 9 9
0 0 0, P (Pause)
*
*
# #
Alphanumeric Editing
(For phonebook name editing and renaming handset)
Number Editing (For phone
editing, date/time editing)
Ł
Key
Key
Press
1st 2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1 SP - 1 1
2
3
D E F 3 3
4 G H I 4 4
5 J K L 5 5
6 M N O 6 6
7 P Q R S 7 7
8 T U V 8 8
9 W X Y Z 9 9
0 0 0, P (Pause)
*
*
# #
Alphanumeric Editing
(For phonebook name editing and renaming handset)
Number Editing (For phone
editing, date/time editing)
Ø
Key
2 A
Æ B C 2
0 system
RECALL(also called FLASH)
In idle / predialing mode:
Press to insert a recall
During a call:Press to dial
a recall
TALK ON
In idle / predialing mode:
Press to make a call
In Redial list / Call List /
Phonebookentry:
Press to make a call to the
selected entry in the list
During ringing:
Press to answer a call
LEFT SOFT KEY(MENU/OK)
In idle mode:Press
to access the main menu
In sub-menu mode:
Press to confirm the selection
During a call: Press to access
Intercom/Phonebook/ Redial
List/ Call List
TALK OFF
During a call: Press to end a call and go
back to idle screen
In menu / editing mode: Press to go back
to previous menu
In idle mode:
Press and hold to power off the handset
In idle mode (when the handset is powered
off): Press and hold to power
DOWN
In idle mode:
Press to access the redial list
In menu mode:
Press to scroll down the menu items
In Phonebook list / Redial list / Call List:
Press to scroll down the list
During a call:
Press to decrease the earpiece volume
During ringing:
Press to decrease the ringer volume
UP
In idle mode:
Press to access the call list
In menu mode:
Press to scroll up the menu items
In Phonebook list / Redial list /
Call List:
Press to scroll up the list
During a call:
Press to increase the
earpiece volume
During ringing:
Press to increase the ringer volume
RIGHT SOFT KEY(CLEAR/BACK/MUTE/INTERCOM)
In sub-menu mode: Press to go back to previous level
In sub-menu mode: Press and hold to go back to idle screen
In editing / predialing mode: Press to clear a character / digit
In editing / predialing mode:
Press and hold to delete all the characters / digits
During a call: Press to mute/ unmute the microphone
In idle mode:Press to intercom another handset
In main menu mode: Press to go back to idle screen
In idle mode: Press to access the redial list.
REDIAL LIST
microphone