Ada Cinema Rhapsody Mach II Installation Manual
Download Installation manual of Ada Cinema Rhapsody Mach II Amplifier for Free or View it Online on All-Guides.com.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
Page 58
11 Turn the Channel knob one click such that the display’s top line reads TREB GROUP B and the
second line reads FREQ in K HZ. To skip the Frequency adjustment and move directly to
adjustment of Bass Group B, skip to step 12. To adjust the Treble Frequency, press the
Channel knob and then dial in the frequency you desire using the Channel knob (1KHz to
30KHz). When set, press the Channel knob.
12 Turn the Channel knob clockwise until the display’s second line reads BACK TO MAIN and
press the Channel knob.
Bass Group B
In this section, we will set the Bass Level and Frequency point for Bass Group A.
13 Turn the Channel knob clockwise until the display’s second line reads BASS GROUP B and
then press the Channel knob.
14 The top line of the display will read BASS GROUP B and the second line will display the LEVEL
in DB. To skip the Level adjustment and move directly to adjustment of the bass frequency,
skip to step 15. To adjust the BASS Level, press the Channel knob and then dial in the level
you desire using the Channel knob (-20dB to +20dB). When set, press the Channel knob.
15 Turn the Channel knob one click such that the display’s top line reads BASS GROUP B and the
second line reads FREQ in HZ. To skip the Frequency adjustment and move directly to
storing these settings in a Tone Preset, skip to step 16. To adjust the Bass Frequency, press
the Channel knob and then dial in the frequency you desire using the Channel knob (20Hz to
980Hz). When set, press the Channel knob.
16 Turn the Channel knob clockwise until the display’s second line reads BACK TO MAIN and
press the Channel knob.
Storing Tone Presets
In this section, we will set store the Speaker Groups, Treble adjustments, and Bass adjustments in a
Tone Preset. Remember that when you Store a Tone Preset, it will overwrite the original Out of the Box
(or previous) Tone Preset settings.
17 Turn the Channel knob counterclockwise until the display reads RECALL/STORE TONE PRE-
SETS and press the Channel knob.
18 Turn the Channel knob clockwise until the top line reads STORE. With the top line of the
display reading STORE, turn the Channel knob and select a TONE PRESET number. Then
press the Channel knob to store the Speaker Groups and Tone Adjustments on this Tone
Preset #. Please note, that this will replace the current settings for this Tone Preset.
19 To completely exit RECALL/STORE TONE PRESETS menu, turn the Volume knob.