Beta 1742A Operation Manual

Download Operation manual of Beta 1742A Power Tool for Free or View it Online on All-Guides.com.

Brand: Beta

Category: Power Tool

Type: Operation manual for Beta 1742A

Pages: 16

Download Beta 1742A Operation manual

Beta 1742A Operation manual - Page 1
1
Beta 1742A Operation manual - Page 2
2
Beta 1742A Operation manual - Page 3
3
Beta 1742A Operation manual - Page 4
4
Beta 1742A Operation manual - Page 5
5
Beta 1742A Operation manual - Page 6
6
Beta 1742A Operation manual - Page 7
7
Beta 1742A Operation manual - Page 8
8
Beta 1742A Operation manual - Page 9
9
Beta 1742A Operation manual - Page 10
10
Beta 1742A Operation manual - Page 11
11
Beta 1742A Operation manual - Page 12
12
Beta 1742A Operation manual - Page 13
13
Beta 1742A Operation manual - Page 14
14
Beta 1742A Operation manual - Page 15
15
Beta 1742A Operation manual - Page 16
16
E. HOW TO ADJUST THE STROKE DISTANCE
Rotate the
STROKE
A
DJUSTER
Rotate the
STROKE
A
DJUSTER
WARNING
 The correct stroke distance is defined on the basis of the Workpiece thickness and the rivet nut
grip range. Each rivet nut has its own grip range, maximum and minimum grip.
 The Workpiece thickness must be within the grip range of the rivet nut or between the maximum
and minimum, to ensure a safe and firm fastening.
 If the rivet nut maximum grip is inferior to the Workpiece thickness, the tool and the rivet nut
threads might be damaged.
 If the minimum grip of the rivet nut is superior to the Workpiece thickness, the rivet nut will not
grip firmly to the Workpiece.
 An excessive stroke distance might result in damage of the tool and the rivet nut threads; the
rivet nut will not ad
j
ust firml
y
to the Work
p
iece.
Stroke
indicator
Figure on the
stroke indicator
= stroke
d
i
sta
n
ce
Close the handles completely (1),
rotate the stroke adjuster (2) to
adjust the correct stroke distance
EITHER) rotate the stroke ad
j
uster to reveal the
figure on the stroke indicator parallel to the
bottom of the stroke adjuster. Figure on the
indicator
=
stroke distance
Rotate
STROKE
A
DJUSTER
1 black line
corresponds to
1mm or 0.04”.
total of line
indicates the
stroke distance.
Workpiece
thickness
Small rule
OR) rotate the stroke adjuster to reveal the
number of exposed lines: 1 line corresponds
to 1mm or 0.04” stroke distance.
The rule is to measure the Workpiece thickness.
NB. We recommend to press handles with a
balanced force to deform the rivet nut.
Gripped
rivet nu
t
workpiece
T
hreaded mandrel
downwards
bul
g
e
Prepared
hole
Screwed
rivet nu
t
Rear body
workpiece
Screwed
rivet nu
t
Prepared
hole
WARNING
If you can not press the handles manually
to touch the rear body, stop immediately
as this may be caused by an excessive
stroke distance. Reduce the strake
distance to avoid damaging the tool and
the rivet nut threads. See Troubleshooting
J-2.
Insert the Screwed RIVET NUT into the Prepared
Hole of the WORKPIECE completely (1). Press
both HANDLES to touch the REAR BODY (2) , that
drives the THREADED MANDREL to deform the
RIVET NUT to fasten the RIVET NUT in the
WORKPIECE ( 3) .
Pull downwards
without twisting
Drill unit
knob
Threaded
mandrel
Gripped rivet
nut &
work
p
iece
Open both handles completely (1), pull the drill
unit knob downwards (without twisting) (2) to
unscrew the threaded mandrel from the gripped
rivet nut (3).
The rivet nut is therefore gripped in the
Workpiece firmly and is secured.
NB. If the rivet nut is not firmly fastened,
please refer to Troubleshooting J-1.
If handles can not be pressed to touch the
rear body, please refer to Troubleshooting
J-2.