Dell 3130cn Service Manual
Download Service manual of Dell 3130cn - Color Laser Printer Label Maker, Printer for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Label Maker , Printer
Type: Service manual for Dell 3130cn - Color Laser Printer
Pages: 854
1 - 199
Chapter 1 Troubleshooting
Version 2 2008.03.27
FIP1.20 009-654-02 Restart Printer
Step
Check Yes No
Possible causative parts:
TRANSFER ASSY (PL4.1.1)
CARTRIDGE ASSY (K) (PL5.1.18)
CARTRIDGE ASSY (C) (PL5.1.19)
CARTRIDGE ASSY (M) (PL5.1.20)
CARTRIDGE ASSY (Y) (PL5.1.21)
DRIVE ASSY MAIN (PL8.1.2)
ROS ASSY (PL5.1.12)
HARNESS ASSY FRONT COVER (PL1.2.11)
HARN ASSY R SIDE (PL10.1.15)
PWBA MCU (PL9.1.20)
1
Checking the detail error code.
A detailed error code is displayed by pushing L key, K key
and 3 key simultaneously.
Is "Code:02" displayed on the LCD?
Go to step 2. Go to FIP1.19.
2
Checking the TRANSFER ASSY for installation
Is the TRANSFER ASSY installed correctly?
Go to step 4.
Reseat the
TRANSFER
ASSY, then go to
step 3.
3 Does the error still occur when the power is turned ON? Go to step 4. End of work
4
Checking the four CARTRIDGE ASSY for installation
Are the CARTRIDGE ASSYs installed correctly?
Go to step 6.
Reseat the CAR-
TRIDGE
ASSY(s), then go
to step 5.
5 Does the error still occur when the power is turned ON? Go to step 6. End of work
6
Checking the toner density
Is there the light color? Compare the density of four colors
toner.
Checked by [Test Print] - [Gradation] in diagnosis.
Go to step 7.
Replace the
PWBA MCU.
(Refer to Removal
30/Replacement
14)
7
Checking the solenoid in the TRANSFER ASSY for opera-
tion
Does the ADC Sensor operate normally?
Checked by [Digital Output] - [DO-37(Control Panel)/CTD
SOLENOID ON(PC)] in diagnosis.
Go to step 12. Go to step 8.
8
Checking the connectors for connection
Check the connections between the PWBA MCU and
TRANSFER ASSY.
Are P/J27, P/J272 and P/J2721 connected surely?
Go to step 9.
Reconnect the
connector(s)
P/J27, P/J272
and/or P/J2721
surely,
then go to step 9.
9
Checking the HARNESS ASSY FRONT COVER for conti-
nuity
Disconnect P/J2721 from the TRANSFER ASSY.
Disconnect P/J272 from the HARN ASSY R SIDE.
Is each cable of P/J2721 <=> P/J272 continuous?
Go to step 10.
Replace the HAR-
NESS ASSY
FRONT COVER.