Dell 3130cn Service Manual
Download Service manual of Dell 3130cn - Color Laser Printer Label Maker, Printer for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Label Maker , Printer
Type: Service manual for Dell 3130cn - Color Laser Printer
Pages: 854
2 - 66
Chapter 2 Operation of Diag.
Version 3 2008.05.30
MAC+PHY Test
PHY Internal loopback test.
Executes this test when the 016-340, 016-344, 016-345, 016-346 and 016-
347 errors occurred.
Test result: NG (Go to each FIP.) OK (Turn off/on the main power.)
MAC: Media Access Control
PHY: Physical Layer
ASIC Test
ASIC Register check.
Executes this test when the 016-313 error occurred.
Test result: NG (Go to FIP.) OK (Turn off/on the main power.)
PANEL Test
Tests the LEDs and buttons of the control panel.
This test checks input and output of the control panel. When buttons are
pressed in the manner shown in the following table, the test displays the
corresponding contents on the LED and LCD.
Indicates left side square is the Ready LED (Green) and right side
square is the Alarm LED (Amber). Not lighting Lighting
IOT Test
Communication test with the IOT.
Executes this test when the 016-370 error occurred.
Test result: NG (Go to FIP.) OK (Turn off/on the main power.)
HD Test
Checks whether the optional HD is inserted or not, and then executes the
Device Diagnostic Command.
Executes this test when the 016-312 error occurred.
Test result: NG (Go to FIP.) OK (Turn off/on the main power.)
Network Key Test
Diagnosis whether there is failures or not in the interface with the H/W
key (Network Protocol Adapter).
NOTE: Check to be sure that the printer is installed with the optional Net-
work key before starting testing.
Executes this test when the 016-365 error occurred.
Test result: NG (Go to FIP.) OK (Turn off/on the main power.)
Item Function
Button LED LCD
Displays “ UP ” on the LCD.
Displays “ DOWN ” on the LCD.
Displays “ LEFT ” on the LCD.
Displays “ RIGHT ” on the LCD.
3 Displays “ SET ” on the LCD.
MENU Displays “ MENU ” on the LCD.
CANCEL Displays “ CANCEL ” on the LCD.
pressed at
the same time
- (The test is
completed)
Displays “ Start ” on the LCD.