installation Instructions
for Heavy duty
Please real ALL installations before installing. Two
or more people are recommended to install this
product. If a new electrical outlet is required, have
the outlet installed by a qualified electrician before
installing unit.
Preliminary Instructions
Do the following before starting to install unit, See
illustrations below.
1, Check window opening size- the mounting
parts furnished with this air conditioner are
made to install in a wooden sill double-hung
window. The standard parts are for a window
opening of 32"(812 mm) minimum to 43"(1092
mm) maximum width. Open sash to a minimum
of 20" (508 mm), (FIG, 1)
2, Check condition of window- all wood parts
of window must be in good shape and able to
firmly hold the needed screws, If not, make
repairs before installing unit,
3, Check your storm windows- if your storm
window frame does not allow the clearance
required, correct by adding a piece of wood as
shown in FIG. 2, or by removing storm window
while room air conditioner is being installed,
(Continued)
1/2" MIN.
SASH
J
t
20" MIN.
STORM WINDOW FRAME OR
OTHER OBSTRUCTION
Fig. 1
FOAM
SASH SEAL
DOUBLE
SIDED SEAL
SIDE
ACCORDION
(RIGHT)
1/4,,x11/2,,
BOLT
MOUNTING
BRACKET
END CAP & ANGLE
LEVELING LEGS BRACKET
SIDE
ACCORDION
(LEFT)
SASH
f
' t
I
il 1/2" MIN. 20" MIN.
1/2" MIN. --_i I_-- I
T
% Zct ss
STORM WINDOW FRAME OR ENTIRE STOOL. FASTEN
OTHER OBSTRUCTION WITH TWO NAILS OR
SCREWS.
Fig. 2
P/N:819042102-01
