Dell Networking S6000 Installation Manual
Download Installation manual of Dell Networking S6000 System Network Hardware, Switch for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Network Hardware , Switch
Type: Installation manual for Dell Networking S6000 System
Pages: 56
The S6000 System | 11
• Temperature monitoring
• Software-readable thermal monitor
• Real time clock (RTC) support
• Hot-plugging redundant power supply
• Current monitoring for power management
• Removable fan that you can manage
• Standard 1U chassis high
Physical Dimensions
The S6000 has the following physical dimensions:
• 434 x 460 x 43.5 mm (W x D x H)
• 17.09 x 18.11 x 1.71 inches (W x D x H)
Chassis Ports
The following is a list of the standard ports located on each S6000 chassis:
• Serial RS-232 port (RJ-45 type)
• Out of band (OOB) Ethernet management port (RJ-45 type)
• Thirty-two 40Gbps QSFP+ ports
• One universal serial bus port (USB Type-A)
Determine System Status
You can view S6000 status information in several ways, including LEDs and boot menu options. Also,
you can view status information through the CLI show commands and with simple network management
protocol (SNMP) traps. For more information about these options, refer to the FTOS Command Line
Reference Guide for the S6000 System and the FTOS Configuration Guide for the S6000 System.
LED Displays
As shown in
Figure 2-3
, the S6000 includes LED displays on both the I/O and PSU side of the chassis.
Table 2-1
through
Table 2-3
list the LED definitions for the S6000 system. This includes the system, PSU,
and fan status.