Dell Networking S6000 Installation Manual
Download Installation manual of Dell Networking S6000 System Network Hardware, Switch for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Network Hardware , Switch
Type: Installation manual for Dell Networking S6000 System
Pages: 56
44 | Specifications
www.dell.com | support.dell.com
Power Requirements
The following tables represent the PSU’s capabilities and do not represent the S6000’s operation.
AC Input Specification
DC Input Specification.
IEEE Standards
The S6000 system complies with the following IEEE standards:
• 802.1AB LLDP
• 802.1ag Connectivity fault Management
• 802.1D Bridging, STP
• 802.1p L2 Prioritization
• 802.1Q VLAN Tagging, Double VLAN Tagging, GVRP
• 802.1s MSTP
• 802.1w RSTP
• 802.3ab Gigabit Ethernet (1000BASE-T)
• 802.3ac Frame Extensions for VLAN Tagging
• 802.3ad Link Aggregation with LACP
• 802.3ae 10 Gigabit Ethernet (10GBASE-X)
Parameter Specifications
Power supply 100–240 VAC 50/60 Hz
Maximum current draw per system 2.9 A @ 280 watts/100vac
1.4 A @ 280 watts/200vac
Maximum power consumption 286 Watts
Reliability MTBF 355,178 hours
min/max input voltage range −40.5V /−48V/ −60V
input power at full load −40.5V/970W −48V/930W −60V/
950W (without fan)
−40.5V/980W −48V/940W −60V/
960W (with fan)
input current at full load −40.5V/23.8A −48V/19.0A −60V/
15.6A (without fan)
−40.5V/24A −48V/19.2A −60V/
16.0A (with fan)
Start up VDC 39.0+/−1.5V
Start off VDC 37.5+/−1.5V