Intermec 3400 Instruction Sheet
Download Instruction sheet of Intermec 3400 Barcode Reader, Label Maker for Free or View it Online on All-Guides.com.
Brand: Intermec
Category: Barcode Reader , Label Maker , Printer , Printer Accessories
Type: Instruction sheet for Intermec 3400
Pages: 2
3400
Parallel I/O
Adapter
Card
Use the following instructions to install a 3400
Parallel I/O Adapter Card into a 3400 printer. This
procedure must be performed only by trained service
personnel.
Parts Provided:
• Parallel I/O Adapter Card
• Ribbon cable
Tools Required:
• Phillips screwdriver
Step 1
Removing the I/O Board Port Cover
1. Switch off the printer power and remove the power
cord from the printer.
2. Remove the media cover and the electronics cover
from the printer.
3. Remove and discard the optional I/O board port
cover from the rear of the printer. Retain the
two screws.
Instruction
Sheet
3400-72
Optional I/O
Board Port
Retain the
two screws.
Optional
I/O Board
Port Cover
(Remove and discard.)