GE GSM2200N Specifications

Download Datasheet of GE GSM2200N Dishwasher for Free or View it Online on All-Guides.com. This version of GE GSM2200N Manual compatible with such list of devices, as: GSM2200N, GSM2200NBB, GSM2200NWW, GSM2200NWW - 24 Inch Under-the-Sink Dishwasher

GE GSM2200N Datasheet - Page 1
1
GE GSM2200N Datasheet - Page 2
2
GE GSM2200N Datasheet - Page 3
3
GE GSM2200N Datasheet - Page 4
4
For answers to your Monogram,
®
GE Profile
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Specification Created 4/07
350511
Listed by
Underwriters
Laboratories
Note: Undersink dishwashers can be installed only
under sinks and not under other appliances.
Plumbing—Hot Water Only: Use 3/8" O.D. copper
tubing or 1/2" O.D. plastic tubing minimum inlet
line. Water valve has 3/8" internal threads. Hand
cut-off valve is recommended.
Electrical: Fuse circuit with 15 amp or 20 amp
standard fuse or circuit breaker. Total amp load is
8.6. Dishwasher operates on 120V, 60HZ power,
Two-wire cable (14 Ga. Min.) with ground must be
installed.
Specifications: Inlet water temperature
recommended—minimum 120°F at dishwasher.
Inlet water pressure required—15 to 120 lbs./sq.
inch.
Note: All rough-in, both plumbing and electrical,
must be completed before the dishwasher is
installed. All plumbing and electrical work must be
in accordance with local codes.
As an ENERGY STAR
®
partner, GE has determined
that this product meets the
ENERGY STAR
guidelines
for energy efficiency.
Spacemaker Dishwasher Dimensions
(Pub. 1-G003 pg. 132B) May 12, 1993
2" From
cabinet
6
4
2" From
floor
19" From
wall
Cable 24"
from wall
3
White (neutral)
Black (line)
Ground
Plumbing and
wiring must enter
within this area
from either side,
rear or bottom
DW PLUMBING/ELECTRICAL
ROUGH-IN (IN INCHES)
FRONT VIEW
Hot
Cold
GSM2200N
GE Spacemaker
®
Under-the-Sink Dishwasher
Dimensions and Installation Information (in inches)