Denso RT1 Owner's Manual

Download Owner's manual of Denso RT1 Air Conditioner for Free or View it Online on All-Guides.com.

Brand: Denso

Category: Air Conditioner

Type: Owner's manual for Denso RT1

Pages: 18

Download Denso RT1 Owner's manual

Denso RT1 Owner's manual - Page 1
1
Denso RT1 Owner's manual - Page 2
2
Denso RT1 Owner's manual - Page 3
3
Denso RT1 Owner's manual - Page 4
4
Denso RT1 Owner's manual - Page 5
5
Denso RT1 Owner's manual - Page 6
6
Denso RT1 Owner's manual - Page 7
7
Denso RT1 Owner's manual - Page 8
8
Denso RT1 Owner's manual - Page 9
9
Denso RT1 Owner's manual - Page 10
10
Denso RT1 Owner's manual - Page 11
11
Denso RT1 Owner's manual - Page 12
12
Denso RT1 Owner's manual - Page 13
13
Denso RT1 Owner's manual - Page 14
14
Denso RT1 Owner's manual - Page 15
15
Denso RT1 Owner's manual - Page 16
16
Denso RT1 Owner's manual - Page 17
17
Denso RT1 Owner's manual - Page 18
18
RT1 AIR CONDITIONING UNIT
OWNERS MANUAL
DENSO AUTOMOTIVE SYSTEMS AUSTRALIA PTY LTD
AL00Z00004E
Published: October 2012
REV #1: May 2013
DENSO AUTOMOTIVE SYSTEMS AUSTRALIA PTY. LTD.
2-46 Merrindale Drive
Croydon Victoria 3136
tel: 03 8761 1449
Width: 110 mm X Length: 210 mm Note: All components must be printed.
The artwork components must not be re-scaled. Re-scaling will create
processing problems.
Delivery Address:
2 -46 Merrindale Dr
CROYDON SOUTH VIC 3136
Denso
Reply Paid 88460
CROYDON SOUTH VIC 3136
Filename: D60744436001110210Y130116.pdf date: 16/01/2013 15:27:18
Please note:
It is the customer's responsibility to check that the artwork is correct, please check the delivery address details and the addressee details below the barcode. Contact Australia Post if any changes are
required.
Failure to adhere to correct addressing and formatting standards will result in higher customer charges or cancellation of service.
Refer to the Reply Paid Service Guide or visit www.auspost.com.au/replypaid
Please check the artwork details thoroughly. Australia Post is not responsible for any errors.
Summary: Envelope Paper Requirements:
- weight of 65 to 100gsm;
- thickness of 0.08 to 0.18 mm;
- stiffness: machine direction of 3 mN; and,
- stiffness: cross direction of 1.5mN.
No print content can appear in the bottom 15 mm on the front of the article or 20mm on the
rear of the article.
WARNING
Changes to this artwork not complying with
Reply Paid Service Guidelines may result in
cancellation of your Reply Paid service.