• Home
• Brands
• Epson Manuals
• Epson ELPDC05 - High Resolution Document Imager Camera
• Epson ELPDC05 Tips

Epson ELPDC05 Tips

Download Tips of Epson ELPDC05 - High Resolution Document Imager Camera Document Camera, Projector for Free or View it Online on All-Guides.com.

1

2

3

Epson ELPDC05 Tips

(Document Camera)

ON/OFF

: Use this to turn the power on and off. The

switch is located on the top of the document camera in

the far right hand corner.

What do the buttons mean?

(INPUT) (RGB1) IRIS IRIS WHITE IMAGE

(MAIN) CAMERA LAPTOP PAUSE OPEN CLOSE AUTO/MANUAL BALANCE ROTATION LAMP

(RGB2) CLEAR MODE TELE WIDE AUTO CONTRAST POSI/NEGA

DESKTOP ZOOM FOCUS

On the main control panel (the panel on the front of the document camera), there are

several buttons labeled as follows:

INPUT/MAIN (or Camera): Use this to select the document camera as the source for

materials to be displayed on the projector. (In some rooms, labels have been affixed to the

control panel so MAIN may be labeled as CAMERA.)

INPUT/ RGB1 (or Laptop): Use this to select the laptop computer as the source for

materials to be displayed on the projector. The laptop needs to be connected to the

document camera using the

SVGA cable provided. (In some rooms, labels have been

affixed to the control panel so RGB1 may be labeled as LAPTOP.)

INPUT/ RGB2 (or Desktop): This is used in Conservation Auditorium to select the

desktop/Smart Sympodium, in Physics 114 and 126 to select the Dell desktop COMPUTER,

and may be used in other rooms to select a Macintosh or Windows desktop machine.

(In

some rooms, labels have been affixed to the control panel so

RGB2 may be labeled as DESKTOP.)

PAUSE: Use this to freeze an image on the screen. Depress again to unfreeze the image.

(During a presentation, it may be necessary to change the materials you are displaying

and this allows you to freeze the first image, change the materials, and then display the

next item.)

CLEAR MODE: Use this to reduce noise in the image projected by the document camera.

To exit, press the button again.

IRIS OPEN/CLOSE: Use these two buttons to control the brightness of the image when

auto iris is off. If the screen looks dark, press and hold the

OPEN button to open the iris

so more light reaches the screen. If the screen looks too bright, press and hold the CLOSE

button. (Auto Iris is off when the

AUTO/MANUAL indicator light is illuminated.)