Epson VS220 Quick Setup
Download Quick setup of Epson VS220 Projector for Free or View it Online on All-Guides.com.
Brand: Epson
Category: Projector
Type: Quick setup
Model: Epson VS220 , Epson VS320 , Epson VS325W
Pages: 4
1
2
3
4
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User’s Guide.
Note: These illustrations show the VS320/VS325W, but the instructions are the
same for the VS220 unless otherwise noted.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Computer
USB port
Connect the square end of a USB cable to the projector’s USB TypeB
(square) port. Connect the flat end of the cable to any USB port on your
computer.
Windows
®
XP or later: After turning on the projector, follow the
on-screen instructions to install the Epson USB Display software
(EMP_UDSE.EXE; only on first connection). If the software screen does not
display automatically, open My Computer or Computer, then double-click
EPSON_PJ_UD.
Mac OS X 10.5.8 or higher: After turning on the projector, the setup folder
for USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Note: If you have problems installing the USB Display software, make sure the
USB Type B setting in the projector’s Extended menu is set to USB Display.
See the online User’s Guide for instructions.
Monitor port
Connect one end of a VGA cable to the projector’s Computer port, and the
other end to your computer’s monitor port. If you are using a laptop,
switch it to external display (see “Troubleshooting”). You can also connect an
audio cable.
HDMI port
Connect one end of an HDMI cable to the projector’s HDMI port and the other
end to an HDMI port on your computer.
Video device
Connect up to 4 video devices and use the remote control to switch between
them.
RCA video cable (composite video)
Component video to VGA cable
S-Video cable
Audio cable
HDMI cable
Camera, USB device, or EPSON DC-06 document camera
Connect a digital camera, USB flash drive, USB storage device, or EPSON
document camera DC-06 to the projector’s USB TypeA (flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s Slideshow feature. See the User’s Guide for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector.
The power light on the
projector turns orange.
3
Open the lens cover all the way.
4
Press the power button on the
projector or remote control. The projector
beeps, the power light flashes green,
and then stays on.
Note: To shut down the projector,
press the power button twice, then
unplug it. You don’t have to wait for the
projector to cool down.
5
The default language of the menu system is English. To select another
language, press the Menu button on the remote control. Select
Extended and press Enter. Select Language and press Enter. Select
your language and press Enter. Press the Menu button to exit the
menu system.
Adjust the image
1
If you don’t see an image, press the Source Search button on the
projector or remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see the
troubleshooting tips on the right.
2
To raise the image, press the
foot release button and lift
the front of the projector.
Release the button to lock the
foot in position.
3
VS320/VS325W: To reduce or enlarge the image, turn the zoom ring.
VS220: To reduce or enlarge the image, press the Tele (reduce) or Wide
(enlarge) buttons on the projector.
VS320
VS325W
VS220
4
Turn the focus ring to sharpen the image.
VS320
VS325W
VS220
5
If your image looks like or , you’ve placed the projector off to
one side of the screen at an angle.
VS320/VS325W: Use the horizontal slider on the projector to correct
it. Or place the projector directly in front of the center of the screen,
facing the screen squarely.
VS220: Place the projector directly in front of the center of the screen,
facing the screen squarely.
6
Your projector automatically adjusts images that look like or ,
but if necessary you can press the or button on the projector to
correct it.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Choose which
source to display
Turn projector
on and off
Access projector
menus
Turn off projector
display
Get solutions to
common problems
Navigate projector
menus
For more information on using the remote control, see the online
User’s Guide.
Troubleshooting
If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
•
Make sure the power light on the projector is green and not flashing,
and the lens cover is open.
•
Press the Source Search button on the projector or the remote control
to switch to the correct image source, if necessary.
•
If you’re using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as . You may have to hold down the
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•
If you’re using a Mac laptop, open System Preferences and select
Displays. Select the VGA Display or Color LCD option if necessary,
then click the Arrange or Arrangement tab, and select the Mirror
Displays check box.
Where to get help
Manual
For more information about using the projector, click the icon on your desktop
to access the online User’s Guide (requires an Internet connection). If you don’t
have a User’s Guide icon, you can install it from the projector CD or go to the
Epson website, as described below.
Telephone support services
To use the EPSON
®
PrivateLine
®
Support service, call (800) 637-7661. This
service is available for the duration of your warranty period. You may also
speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or
(905) 709-3839 (Canada).
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am
to 4 pm, Pacific Time, Saturday
Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.
Internet
Visit www.epson.com/support (US) or www.epson.ca/support (Canada)
for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates, special promotions and customer-only
offers. You can use the CD included with your projector, or register online at
www.epson.com/webreg.
VS220/VS320/VS325W
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PrivateLine is a registered trademark of Epson America, Inc.PrivateLine is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2012 Epson America, Inc. 9/12
Printed in XXXXXX CPD-38315
*412419400*
*412419400*
USB cable
HDMI cable
VGA cable