Black Box LE3010A Specifications

Download Specifications of Black Box LE3010A Transceiver for Free or View it Online on All-Guides.com. This version of Black Box LE3010A Manual compatible with such list of devices, as: LE3010A, LE2127A-R3, LE3011A, LE2006A-R3, LE2051A-ST-R4

Black Box LE3010A Specifications - Page 1
1
Black Box LE3010A Specifications - Page 2
2
Black Box LE3010A Specifications - Page 3
3
1
Connect compatible
devices to a 10BASE-T,
ThinNet, or fiber optic
Ethernet segment.
Comply with the
IEEE FOIRL, Ethernet
802.3, 10BASE-T, or
10BASE-FL standards.
Compact and
lightweight for
easy placement.
Diagnostic LEDs
simplify monitoring
and troubleshooting.
All models attach
directly to device
ports, saving on AUI
cabling.
F
or their size, flexibility, and
convenience, our 10BASE-T,
BNC, and Fiber Optic Trans-
ceivers are the transceivers of
choice to connect any device to
your 10-Mbps twisted-pair,
ThinNet, or fiber segments.
For a basic multimode fiber
connection that takes up the least
possible space, choose the Mini
Fiber Transceiver (LE2051A-ST-
R4). It’s tiny, but it has all the
diagnostic LEDs built in.
A Mini FOIRL LD Transceiver
with ST (LE2127A-R3) is an
economical choice for an older
FOIRL network when you don’t
need 10BASE-FL compatibility.
For single-mode fiber
networks, choose the Micro
Compact 10BASE-T, BNC, or
fiber connections that are
simple to install and maintain.
Key Features
MINI AND MICRO TRANSCEIVERS
Single-Mode Fiber Transceiver
(LE1342A-R3).
The Mini Multimode Fiber
Optic Transceiver (LE1076A-ST)
can be used to create a link over
all types of duplex multimode fiber
optic cable. Run fiber up to
1.2 miles (1.9 km) between two
workstations or local repeaters.
It also works well in full duplex
applications.
All fiber models are available
with ST
®
connectors for the
fiber interface and DB15 male
connectors for the AUI interface.
Switch-selectable SQE and
10BASE-FL or FOIRL compatibility
make these transceivers fit any
standard 10-Mbps application.
For 10BASE-T connections
with minimal cable insertion loss,
select the Mini 10BASE-T
Transceivers with Attached Cable
(LE3010A, LE3011A). These
transceivers have an integral 6-
inch (15.2-cm) transceiver cable
on one side, and a 15-foot (4.6-m)
twisted-pair cable on the other
side. The LE3010A has a slide-lock
connector, and the LE3011A
features a screw-lock connector.
Both transceivers comply with the
IEEE 802.3 10BASE-T standard.
The Mini BNC Transceiver
(LE2006A-R3) is perfect for use in
small spaces. It connects the
Ethernet port on your PC directly
to ThinNet cable without using a
transceiver cable.
Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com e-mail: [email protected]
© 2005. All rights reserved.
Black Box Corporation.
3/7/2005 #11330