• Home
• Brands
• ACT Technology Manuals
• ACT Technology ACT1000
• ACT 1000 - ACCESS CONTROL UNIT - INSTALLERS Instructions

ACT 1000 - ACCESS CONTROL UNIT - INSTALLERS Instructions

Download Installation instructions of ACT Technology ACT1000 Gateway for Free or View it Online on All-Guides.com. This version of ACT Technology ACT1000 Manual compatible with such list of devices, as: ACT1000, ACT1000 - ACCESS CONTROL UNIT - INSTALLERS, ACT2000, ACT2000 - ACCESS CONTROL UNIT - INSTALLERS

1

2

ACT1000/2000 Access Control Unit

(Installers Instructions)

QUICK PROGRAMMING GUIDE

1. Enabling cards

. Enter the operator code.

. Press ü to enter the user set-up menu.

. Press ü to enter the enable menu.

For a single card:

. Use 0 to scroll to the desired card.

. Press ü to enable the card.

For a range of cards:

. Use keys 0-9 to enter the first card. Press ü.

. Use keys 0-9 to enter the last card. Press ü.

. Use X to exit from the menu.

2. Disabling cards

. Enter the operator code.

. Press ü to enter the user set-up menu.

. Press 0, then ü to enter the enable menu.

For a single card:

. Use 0 to scroll to the desired card.

. Press ü to disable the card.

For a range of cards:

. Use keys 0-9 to enter the first card. Press ü.

. Use keys 0-9 to enter the last card. Press ü.

. Use X to exit from the menu.

3. Setting Time and Date

. Enter the operator code

. Use 0 to scroll to “Set Date/Time”

. Press ü to select.

. Use numeric keys 0-9 to Enter the year . Press ü

. Repeat for month, day , hour and minute.

. New time will be displayed. Press ü to Accept.

. Use X to exit from the menu.

Factory default codes:

Operator: 123456

Installer: 999999

4. Setting site code

. Enter the installer code.

. Use 0 to scroll to Card Setup menu.

. Press ü to enter the card setup menu.

. Press ü to enter the site code.

. Use keys 0-9 to enter the eight digit ACT site code.

. Use 0 to exit the menu.

5. Changing Installer code.

. Enter installer code.

. Use 0 to scroll to Change Pin menu.

. Press ü to enter change pin menu.

. Use keys 0-9 to enter new pin.

. Use keys 0-9 to verify pin.

. The controller will display Accepted , the new pin is set.

. Use 0 to exit the menu.

6. Changing relay and output active time.

. Enter the installer code.

. Use 0 to scroll to Door Settings menu.

. Press ü to enter the door settings menu.

. Use 0 to scroll to the door required.

. Press ü to enter the door menu.

. Use 0 to scroll to timers menu.

. Press ü to enter the timers menu.

. Use 0 to scroll to the required timer menu.

. Press ü to enter selected timer menu.

. Use keys 0-9 to enter the time you want the relay or

output to stay active.

. Use 0 to exit the menu.

7. Adding a remote door (ACT2000 Only)

. Enter the installer code.

. Use 0 to scroll to Communications menu.

. Press ü to enter the Communications menu.

. Use 0 to scroll to Remote doors menu.

. Press ü to enter the Remote dooors menu.

. Use 0 to scroll to the required door.

. Press ü to select the door.Use 0 to select Enable/Disable.

. Press ü to Enable or Disable the door as selected.

. Use 0 to exit the menu.

IMPORTANT

As with any access control system, always ensure that there

is an alternate means of escape in the event of the unit fail-

ing to operate due to power loss or in the event of fire.

Unit 8, Tallaght Business Park,

Whitestown, Dublin 24, Ireland.

Tel: 353-1-4622585 Fax: 353-1-4622587

Copyright  2002 Access Control Technology Ltd.

(18-00008-00)

INSTALLATION NOTES

• Always remember to factory default the controller before

you start programming.

• Always remember to place the supplied Varistor

across the terminals of the door strike coil to protect

the relay contacts.

• Don’t forget to change the programming code to

something known only to yourself.

• Don’t forget to keep a record of your Site Code for

future use.

Visit our website: www.accesscontrol.ie