ACT 1000 - ACCESS CONTROL UNIT Operator Instructions

Download Operator instructions of ACT Technology ACT1000 Gateway for Free or View it Online on All-Guides.com. This version of ACT Technology ACT1000 Manual compatible with such list of devices, as: ACT1000, ACT1000 - ACCESS CONTROL UNIT - INSTALLERS, ACT2000, ACT2000 - ACCESS CONTROL UNIT - INSTALLERS

ACT Technology ACT1000 Operator instructions - Page 1
1
ACT Technology ACT1000 Operator instructions - Page 2
2
ACT1000/2000 Access Control Unit
(Operator Instructions)
QUICK PROGRAMMING GUIDE
(for typical Standalone System)
1. Enabling cards
. Enter the operator code.
. Press ü to enter the user set-up menu.
. Press ü to enter the enable menu.
For a single card:
. Use 0 to scroll to the desired card.
. Press ü to enable the card.
For a range of cards:
. Use keys 0-9 to enter the first card. Press ü.
. Use keys 0-9 to enter the last card. Press ü.
. Use X to exit from the menu.
2. Disabling cards
. Enter the operator code.
. Press ü to enter the user set-up menu.
. Press 0, then ü to enter the enable menu.
For a single card:
. Use 0 to scroll to the desired card.
. Press ü to disable the card.
For a range of cards:
. Use keys 0-9 to enter the first card. Press ü.
. Use keys 0-9 to enter the last card. Press ü.
. Use X to exit from the menu.
3. Setting Time and Date
. Enter the operator code
. Use 0 to scroll to “Set Date/Time”
. Press ü to select.
. Use numeric keys 0-9 to Enter the year . Press ü
. Repeat for month, day , hour and minute.
. New time will be displayed. Press ü to Accept.
. Use X to exit from the menu.
Factory default code: ( Operator: 123456 ).
4. Changing Operator code.
. Enter operator code.
. Use 0 to scroll to Change Pin menu.
. Press ü to enter change pin menu.
. Use keys 0-9 to enter new pin.
. Use keys 0-9 to verify pin.
. The controller will display Accepted , the new pin is set.
. Use X to exit from the menu.
5. Learning cards onto controller.
. The installer must have the learn facility enabled in the
Installer menu to allow cards to be learned.
. Enter operator code.
. Press ü to enter the user set-up menu.
. Use 0 to scroll to Learn menu.
. Press ü to enter learn menu.
. Use 0 to scroll to the user number which is required.
. Press ü to allow the selected user to be learned.
. Swipe the card which you want learned for selected user.
. User number Accepted is displayed.
. Use X to exit from the menu.
6. Entering a batch of cards onto controller.
. Enter operator code.
. Press ü to enter the user set-up menu.
. Use 0 to scroll to Batch Cards menu.
. Press ü to enter Batch Cards menu
. Use 0 to scroll to an unused batch.
. Press ü to allow the first card in the batch to be programmed.
. Swipe the first card in the batch.
. Swipe the last card in the batch.
. Enter the user number to be assigned to the first card
. Batch Accepted is displayed
. Use X to exit from the menu.
Note: To Program the advanced features of the ACT1000/2000 use the
Operating Instructions which are available from the distributor.
IMPORTANT
As with any access control system, always ensure that there is an
alternate means of escape in the event of the unit failing to oper-
ate due to power loss or in the event of fire.
Unit 8, Tallaght Business Centre,
Whitestown, Dublin 24, Ireland.
Tel: 353-1-4622585 Fax: 353-1-4622587
Copyright 2002 Access Control Technology Ltd.
(18-00007-00)
Good Housekeeping.
Access Control Technology thank you for choosing its product.
Please find below some useful notes to ensure satisfactory
performance from your Access Control System.
Ensure that any lost cards are immediately deleted from the
system.
Ensure that any damaged user cards are replaced , by your
Installer.
Ensure that your staff are fully aware of the operation of readers
and report any system problems to the Installer immediately .
Visit our website.
www.accesscontrol.ie