• Home
• Brands
• American Standard Manuals
• American Standard Yorkvilletm 3125.016
• American Standard Yorkvilletm 3125.016 Specification Sheet

American Standard Yorkvilletm 3125.016 Specification Sheet

Download Specification sheet of American Standard Yorkvilletm 3125.016 Indoor Furnishing for Free or View it Online on All-Guides.com. This version of American Standard Yorkvilletm 3125.016 Manual compatible with such list of devices, as: Yorkvilletm 3125.016, Yorkvilletm 4099.100, Yorkvilletm 4099.700, Yorkvilletm 4099.800, Yorkvilletm 735084-400

1

M42

© 2008 AS America Inc.

Revised 2/08

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Linen

❏ Silver ❏ Fawn Beige ❏ Black

❏ Seat: American Standard #5324.019

Elongated “Rise and Shine” (with easy to clean

lift-off hinge system) solid plastic closed front

seat with cover.

❏ Seat: American Standard #5325.024

Elongated “Rise and Shine” (with easy to clean

lift-off hinge system) solid plastic open front

seat with cover.

❏ Alternate Seat:

❏ Supply with Stop:

* Flushmate III tank system by Flushmate

®

Div. of Sloan Valve Co

YORKVILLE™ 16-1/8" ELONGATED

PRESSURE-ASSISTED TOILET

VITREOUS CHINA

YORKVILLE™ 16-1/8" ELONGATED

PRESSURE-ASSISTED TOILET

❏ 2325.101

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• Floor-mounted, back-outlet toilet

• Elongated 16-1/8" high bowl

• Pressure-assisted siphon jet ush action

• Side-mounted chrome trip lever

• Close-coupled ushometer tank*

• Speed Connect

®

tank/bowl coupling system

• 4 bolt caps

• Fully glazed 2" ballpass trapway

• 10" x 12" water surface area

• 100% factory ush tested

❏ 3125.016 Elongated 16-1/8" high bowl with

four bolt caps and two oor screws

❏ 4099.100 Flushometer tank complete with

coupling components

Component parts:

❏ 735084-400 Tank cover (specify color)

Nominal Dimensions:

819 x 495 x 803mm

(32-1/4" x 19-1/2" x 31-5/8")

Alternate Congurations:

❏ 4099.700 Tank and tank cover only

with tank cover locking device

❏ 4099.800 Tank and tank cover only

with right hand trip lever

Fixture only, seat and supply by others

Recommended working pressure range 20 psi - 80ps

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.2 for Vitreous China Fixtures

NOTES:

WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-

FELT (WAX RING NOT RECOMMENDED).

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

*

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

FOR ADDITIONAL INFORMATION REFER TO INSTALLATION

INSTRUCTIONS SUPPLIED.

IMPORTANT: Dimensions of xtures are nominal and may vary within

the range of tolerances established by ANSI Standard A112.19.2. These

measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided pages.

803mm

(31-5/8)

235mm

(9-1/4)

410mm

(16-1/8)

381mm

(15)

470mm

(18-1/2)

648mm

(25-1/2)

819mm

(32-1/4)

C/L OF SEAT

POST HOLES

140 mm (5-1/2)

CENTER

FINISHED WALL

FINISHED

FLOOR

152 mm

(6)

64mm (2-1/2)

324mm

(12-3/4)

C/L OF 1/2" DIA HOLES

152mm (6) CENTERS

76mm

(3)

76mm

(3)

102 mm

(4)

C/L OF

WASTE

OUTLET

13 x 19mm

(1/2 x 3/4)

SLOTS

FLEX

SUPPLY

AS REQ.

C/L

*

222mm

(8-3/4)

19mm ± 6mm

(3/4 ± 1/4)

495mm

(19-1/2)

279mm

(11)

Replaces 2325.100

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND

ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE

BUILDING FACILITIES-CHECK LOCAL CODES.

BARRIER FREE