HP PSC 2500 Quick Start

Download Setup poster of HP PSC 2500 - Photosmart All-in-One Printer All in One Printer, Printer for Free or View it Online on All-Guides.com. This version of HP PSC 2500 - Photosmart All-in-One Printer Manual compatible with such list of devices, as: PSC 2500 - Photosmart All-in-One Printer, PSC 2500 series, PSC 2510, PSC 2510xi, PSC 2550

HP PSC 2500 - Photosmart All-in-One Printer Setup poster - Page 1
1
HP PSC 2500 - Photosmart All-in-One Printer Setup poster - Page 2
2
1
2
3
4
5
6
7
8
9
1111
1010
a b
c d
Windows Direct Connect (USB) setup poster
Windows Direct Connect (USB)
START HERE
Windows Direct Connect (USB)
START HERE
Turn your computer on
Turn on your computer and wait for
the Windows desktop to appear.
Close any open programs.
Begin software installation
Attach front panel cover
Connect power cords
Connect phone cord
Insert the HP PSC
Windows CD.
Follow the onscreen
instructions.
Remove any packaging material.
Place the front panel cover over the
buttons. Firmly press on the sides to
snap the cover in place. Make sure all
the buttons are visible.
Lift the display.
Load paper
Connect USB cable
Insert and align print cartridges
Turn HP device on
You must connect the supplied phone
cord to the phone jack on the left
(1-LINE).
To connect an answering machine or
use your own phone cord, see the Fax
Setup chapter in the Reference
Guide.
Make sure the power is on. Lift
the print carriage door up until
it catches. Wait for the print
carriage to move to the right.
Lift the blue and gray latches.
Remove the bright pink tape
from both print cartridges. Do
not touch the gold-colored
contacts or retape the
cartridges.
Press down on the gray latch
until it locks into place. Insert
the color cartridge on the left
side, and lock into place.
Make sure both latches are
locked into position. Close
the door.
If the software does not appear on
your computer screen after inserting
the CD, see the Troubleshooting
Information chapter in the
Reference Guide.
Make sure that you see the
screen in step 3 before plugging
in your USB cable. Do not
connect the USB cable to a
keyboard.
After you restart your computer, the Fax Setup
Wizard appears. Follow the onscreen instructions.
When you see the Congratulations! dialog
box, you are ready to use your HP PSC. If you
encounter any problems during setup, see the
Reference Guide.
Turn power on. Wait for the print
cartridge message, and then
continue.
Use plain white paper to
prepare for print alignment.
Press OK on the front
panel to begin alignment.
After a page prints,
alignment is complete.
Discard or recycle this
page.
f
Hardware setup is complete. Return to your computer. On
the screen with the green checkmark, click Next.
Depending on your system, it may take 20 minutes or
more to finish installing the software.
www.hp.com/support Copyright Hewlett-Packard Company 2003
Printed in US.
Do not connect the USB
cable yet. When you see the
Setup your Device Now
dialog box, continue to step 4.
Finish software installation
ed
c
b
a
a
b
a
b
c
a
b
c
a
b
hp psc 2500 photosmart series all-in-one
This side of this poster covers
Windows direct connect setup.
See reverse side for Macintosh.
Network setup is covered on the other
poster. Make sure you use the correct
poster and CD.
1-LINE
a
b
Hold the black print cartridge with the
label on top as shown. Slide the
cartridge underneath the metal bar
into the right (gray latch) side of the
print carriage.
Q3093-90164
*Q3093-90164*
*Q3093-90164*