HP Compaq SP700 User Manual
Download Operation & user’s manual of HP Compaq SP700 Desktop for Free or View it Online on All-Guides.com.
3-1
Compaq Professional Workstation SP700 Maintenance and Service Guide
Chapter 3
Removal and Replacement Procedures
This chapter provides subassembly/module-level removal and replacement procedures for the
Compaq Professional Workstation SP700.
After completing all necessary removal and replacement procedures, run the Compaq Setup and
Diagnostics program to verify that all components are operating properly.
Serial Number
Provide the computer serial number to Compaq whenever you request information or order spare
parts. The serial number is located just above the right top side of the side access panel
➊
and on
the rear of the workstation
2
.
For asset control, the serial number is also embedded in the EPROM on the system board. If the
system board is replaced with a spare part from Compaq, an invalid serial number condition will
be reported during POST. To clear the condition, reenter the original serial number through
Computer Setup.
NOTE: If a system board from another workstation is installed, POST recognizes the serial
number as a valid number.
1
2
Figure 3-1. Serial number locations