• Home
• Brands
• Black Widow Security Manuals
• Black Widow Security BW RAS 200
• Black Widow Security BW RAS 200 Installation Manual

Black Widow Security BW RAS 200 Installation Manual

Download Installation manual of Black Widow Security BW RAS 200 Security System for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

REMOTE AUTO START

FOR KEYLESS ENTRY AND ADD-ON REMOTE START MODULES

BEFORE INSTALLING THIS PRODUCT PLEASE READ

THIS INSTALLATION MANUAL THOROUGHLY!!

INSTALLATION MANUAL

This remote start product is intended for installa-

tion on vehicles equipped with automatic transmis-

sions and electronic fuel injection only!

DO NOT INSTALL THIS UNIT INTO A MANUAL

TRANSMISSION VEHICLE AS IT COULD RESULT IN

SERIOUS INJURY OR DEATH.

• This product must be installed by qualified per-

sonnel according to these instructions and

observing all safety features.

• The system should be placed into the valet

mode when parked inside a garage or being left for

service.

• Always notify service personnel that the vehi-

cle is equipped with a Remote Starter.

• Only start the vehicle in a well ventilated area.

Do not use in a closed garage or indoors.

ITEMS INCLUDED:

• Main unit

• Remote transmitter(s)*

• Plug In LED

• Plug in program switch

• Harness kit with 2 heavy duty fuse holders

• Hood pinswitch

• Extended range receiver module*

• Owner’s manual

*

S models are provided with single transmitter only.

Add-on modules do not include transmitters.

OPTIONAL ACCESSORIES:

• VAC-10 Vacuum Switch Kit

• APP-1 Universal OEM transponder bypass kit

• APV-1 GM VATS, Passlock I&II bypass kit

• PDLM-3 Power door lock relay module

Before you begin the installation:

• Verify that the vehicle is equipped with elec-

tronic fuel injection.

• Verify that the vehicle is equipped with an auto-

matic transmission.

• Check to see if the vehicle is equipped with any

type of factory security system.

• Check to see if there is a pinswitch for the

hood, if not one must be installed.

• Verify that the vehicle starts and idles proper-

ly before you start the installation.

• Verify with the customer the desired location

for the program switch and LED.

• Always use a multimeter when verifying vehi-

cle wiring.

Remote Start Installation Notes:

The remote start unit senses the vehicle’s success-

ful start using one of the following methods:

1. Current sense

2. Tachometer sense

3. Spark or coil wire sense

4. Using optional vacuum switch.