Compaq Presario 6500 - Desktop PC Manual

Download Manual  of Compaq Presario 6500 - Desktop PC Desktop, Laptop for Free or View it Online on All-Guides.com.

Compaq Presario 6500 - Desktop PC Manual  - Page 1
1
Compaq Presario 6500 - Desktop PC Manual  - Page 2
2
System Recovery
Réinstallation système
Systeemherstel
System Recovery
The system recovery CDs are licensed for use only with your
specific PC model.
The system recovery program offers two recovery options:
Standard Recovery (non-destructive) or Full System Recovery.
Standard Recovery: This is a non-destructive recovery,
which recovers factory-shipped programs, drivers and the
operating system, without affecting any data files that you
may have created since purchasing this PC. Some data files
may be difficult to find after the system recovery, so it is
best to back up all hard disk files before performing a
system recovery.
Full System Recovery: This recovery function completely
erases and reformats the hard disk. The program performs
a full system recovery to reinstall the operating system,
programs and drivers from the recovery CDs. However, you
must reinstall any software that was not installed on the
computer at the factory. This includes software that came on
the CDs included in the computer accessory box, and
software programs you installed since your purchase.
Note: If your PC has a blank or corrupted hard disk, you can
use only the full system recovery option.
To run the system recovery program:
1 If the computer works, you can back up all data files that
you want to save onto removable media, such as CD-RW or
diskette. Remove the backup CD or diskette you’ve made.
2 Turn off the computer:
If the computer works: Click Start on the taskbar, click
Turn Off Computer, and then click Turn Off.
Or
Press and hold the On button for approximately 5 seconds
until the computer turns off.
3 Disconnect all peripheral devices from the PC, except the
monitor, the keyboard and the mouse.
4 Press the On button to turn on the computer.
5 When the colour screen with the logo appears, press the F1
key on the keyboard until Entering SETUP is displayed. (You
only have a few seconds to press the F1 key before the
normal startup process continues.) Wait until the BIOS setup
program opens.
6 Press the right arrow key to select Boot.
7 Press the down arrow key to select Boot Device Priority, and
then press Enter on the keyboard.
8 Change the first boot device to CD-ROM using one of these
methods:
Press the down arrow key to select the CD-ROM item.
Press the + (plus) key to move the CD-ROM item up until it
is the first item in the list.
Or
Press the down arrow key to highlight the First Boot
Device selection. Press the + (plus) key until CD-ROM is
the selection.
When installation is complete you’ll return the BIOS to the
original setting.
9 Press the Eject button on the top CD-ROM drive, and wait
for the tray to open. Insert the System Recovery CD #1
and close the tray.
10 Press the F10 key to save the changes and exit BIOS.
11 With Ye s selected, press Enter.
12 The PC starts the recovery; wait for the onscreen
instructions to display, and then follow those instructions:
If your PC hard disk is blank or corrupted, press R to
perform a full system recovery. Insert the remaining CDs
when directed.
Or
For standard recovery, press R, and then press R again.
Click Next to proceed with the non-destructive system
recovery. Click Yes to start the recovery. Insert the
remaining CDs when directed.
Or
For full system recovery, press R, and then press F. Click
Yes to perform the full system recovery. Insert the
remaining CDs when directed.
When the recovery program finishes, click Restart to
restart the computer.
13 Before the computer restarts, the CD tray ejects. Remove
the CD.
14 Return the BIOS to the original setting. During the startup,
when the colour screen with the logo appears, press the
F1 key on the keyboard until Entering SETUP is displayed.
(You only have a few seconds to press the F1 key before
the normal startup process continues.) Wait until the BIOS
setup program opens.
15 Press the right arrow key to select Boot.
16 Press the down arrow key to select Boot Device Priority,
and then press Enter on the keyboard.
17 Return the first boot device to the original setting using
one of these methods:
Press the down arrow key or up arrow key to select the
CD-ROM item. Press the – (minus) key to move the
CD-ROM item down until it is the third item in the list.
Or
Press the down arrow key to highlight the First Boot
Device selection. Press the + (plus) key until Floppy is
the selection.
18 Press the F10 key to save the changes, and then exit
BIOS.
19 With Ye s selected, press Enter. After the computer restarts,
a series of startup screens appear. To proceed with the
initial Microsoft Windows setup, you must answer a few
questions.
20 Complete the registration process, and then reconnect all
peripheral devices.
21 Reinstall software not originally installed on the computer
by the factory.
22 Copy data files you saved on the backup CD or diskette
you made to your hard disk.
Note: If you have questions about the system recovery
procedure, please contact Support; see your support
documentation included with the computer
documentation.
Réinstallation système
La licence des CD de réinstallation système n’est accordée que
pour votre modèle d’ordinateur spécifique.
Le programme de réinstallation système offre deux options de
réinstallation : Réinstallation standard (sans perte de données)
ou Réinstallation complète du système.
Réinstallation standard : Il s’agit d’une réinstallation
sans perte de données, qui restaure le système
d’exploitation, les pilotes et les logiciels installés sur
l’ordinateur à la sortie d’usine, et ce sans affecter les
fichiers créés depuis l’achat de l’ordinateur. Certains
fichiers de données peuvent être difficiles à localiser après
la réinstallation, et il est donc recommandé d’effectuer une
sauvegarde des fichiers de votre disque dur avant
d’exécuter une réinstallation système.
Réinstallation complète du système : Cette fonction
de réinstallation efface et reformate la totalité du disque
dur. Le programme effectue une réinstallation complète du
système pour réinstaller le système d’exploitation, les
programmes et les pilotes à partir des CD de réinstallation.
Cependant, vous devez réinstaller les logiciels qui n’étaient
pas installés à l’origine sur l’ordinateur. Ceci inclut les
logiciels contenus sur les CD de la boîte d’accessoires de
l’ordinateur et les logiciels que vous avez installés depuis
que vous avez acheté l’ordinateur.
Remarque : Si votre ordinateur a un disque dur vierge ou
altéré, vous pouvez uniquement utiliser l’option de
réinstallation complète du système.
Pour exécuter le programme de réinstallation système :
1 Si l’ordinateur fonctionne normalement, nous vous
conseillons de sauvegarder tous les fichiers de données que
vous souhaitez enregistrer sur un support amovible tel qu’un
CD réinscriptible ou une disquette. Retirez le CD ou la
disquette de sauvegarde que vous venez de créer.
2 Éteignez l’ordinateur :
Si l’ordinateur fonctionne normalement : Cliquez sur
démarrer dans la barre des tâches, cliquez sur Arrêter
l’ordinateur puis cliquez sur Arrêter.
— Ou —
Appuyez sur le bouton de mise sous tension et maintenez-
le enfoncé pendant environ 5 secondes jusqu’à ce que
l’ordinateur s’éteigne.
3 Déconnectez tous les périphériques reliés à l’ordinateur,
sauf le moniteur, le clavier et la souris.
4 Appuyez ensuite sur le bouton de mise sous tension pour
démarrer l’ordinateur.
5 Lorsque l’écran de couleur avec le logo apparaît, appuyez
sur la touche F1 du clavier jusqu’à l’affichage de Début
configuration à... (Vous disposez de quelques secondes
pour appuyer sur F1 avant que le processus de démarrage
normal ne continue.) Attendez que le programme de
configuration du BIOS s’ouvre.
6 Appuyez sur la touche fléchée vers la droite pour
sélectionner Démarrer.
7 Appuyez sur la touche fléchée vers le bas pour sélectionner
Priorité périph. démarrage puis appuyez sur la touche
Entrée du clavier.