Motorola MC32N0 SERIES Quick Start Manual

Download Quick start manual of Motorola MC32N0 SERIES Barcode Reader, Handhelds for Free or View it Online on All-Guides.com.

Motorola MC32N0 SERIES Quick start manual - Page 1
1
Motorola MC32N0 SERIES Quick start manual - Page 2
2
3
4
5
1
2
6
Four Slot Cradle
FEATURES
Installing an Optional microSD Card Charge the MC32N0
Single Slot Cradle
GETTING STARTED
QUICK START GUIDE
24hr*
Installing the Battery
Trigger
Stylus
Display
Scan Button
Keypad
Indicator LED Bar
Strap Lanyard
Trigger
Speaker
Headset Jack
Speaker
MC32N0-G
MC32N0-R
MC32N0-S
Scan Indicator
Scan Button
Display
Receiver
Indicator LED Bar
Scan Button
Keypad
Power
Microphone
Battery Release Button
Battery Release Button
Scan Button
Speaker
Stylus
Handstrap
Battery Release Button
Scan Button
MC32N0-S/R
Rotate Turret
1. On the MC32N0-R/S, loosen the
handstrap.
2. Align the top of the battery into the
battery compartment.
3. Rotate the bottom of the bottom
into the battery compartment.
4. Press the battery down until it
snaps into place.
5. On the MC32N0-R/S, tighten the
handstrap.
Back View
Back View
MC32N0-R
1. Remove the SD card cover using
stylus.
2. Slide the SD card holder down to
unlock.
3. Lift the SD card holder.
4. Place the microSD card into the
contact area.
5. Close the SD card holder and slide
the SD card holder up to lock.
6. Replace the SD card cover and
ensure that it is installed properly.
Speaker
Stylus
Headphone Jack
Handstrap
1. Install battery adapter into
spare battery slot.
2. Install battery into adapter.
MC32N0 SERIES
It is recommended that this product be charged for 24 hours before the first use
to ensure that the internal battery is fully charged.
*