Lightolier Paralyte PLA2G12LS232 Specifications

Download Specifications of Lightolier Paralyte PLA2G12LS232 Indoor Furnishing for Free or View it Online on All-Guides.com.

Lightolier Paralyte PLA2G12LS232 Specifications - Page 1
1
Lightolier Paralyte PLA2G12LS232 Specifications - Page 2
2
Dimensions
Paralyte 2448 PLA2G12LS232
Page 1 of 2 2' x 4' Recessed Fluorescent, 3-1/8" Deep, 12 Cell Parabolic Louver
Static and Air Return 2 Lamp, T8 or T12
Mounting Methods
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2003 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 2/Folio G50-62 Rev. A
Features
23” x 47” louver
Efficiency 78.9%.
One fixture fits 50 different G type and T type ceiling systems.
Only 5 1/2” deep housing.
Automatic engaging adjustable seismic clips.
Pre-anodized aluminum vertical grain parabolic louver.
3 1/8” deep louver.
Low iridescence semi-specular aluminum, standard.
Spring-loaded latches.
Protective film dust guard.
UL-Listed twin knockout access plate.
Not for continuous row mounting.
*If less than 1 1/2”, STC spacer is
required, 2 each end.
4/03
slot grid
two-directional concealed grid
narrow grid system
standard grid
Adjustable
seismic
clip
(patented)
Adjustable
seismic
clip
(patented)
*1-1/2"
*1-1/2"
Adjustable
seismic
clip
(patented)
*1-1/2"
Adjustable
seismic
clip
(patented)
3-3/4"
(95mm)
NOTE: Fixtures may be used for static or air return applications.
3" x 3" access plate
with two K.O.’s (7/8" dia.)
3-3/4"
(95mm)
48" (1219mm)
c
L
Heat exhaust
vents
24" (610mm)
5-1/2"
(140mm)
air return
capabilities
exceed
standard
requirements
(see Folio
G50-60)