• Home
• Brands
• Artstic Licence Manuals
• Artstic Licence Art-Switch PoE4
• Artstic Licence Art-Switch PoE4 User Manual

Artstic Licence Art-Switch PoE4 User Manual

Download Operation & user’s manual of Artstic Licence Art-Switch PoE4 Switch for Free or View it Online on All-Guides.com.

1

2

3

4

Art-Switch PoE4 User Guide

(Version 1-2)

Art-Switch PoE4

TM

is a DIN-Rail Ethernet switch. It provides five 10/100BaseT Ethernet

ports, four of which support Power over Ethernet (PoE).

Art-Switch PoE4 is housed in a small robust DIN-Rail case that can also be surface mounted.

All Ethernet connections are made via RJ45's. Each port has individual indicators to show

speed of connection, PoE use and activity.

The input power required is 48V DC and is via an un-pluggable screw terminal connector

(supplied). Art-Switch is capable of auto configuration per port, which includes speed, duplex

and cable type.

The PoE output on the four ports complies with the IEEE802.3af standard. Art-Switch is capable of providing power and data to four other

products in the Art-Range such as Art-Lynx O/P or Art-Relay. It can also be used with any PoE or Ethernet compatible nodes.

Key Features:

 5 port Ethernet Switch

 10BaseT / 100BaseT, Half / Full-Duplex

 IEEE802.3af PoE capable (4 port)

 DIN-Rail or surface mount

 Art-Net compatible

 Individual port speed, activity & PoE indicators

 Auto-sensing per port

 Auto-uplink detection (cable type)

 Power Device (PD) Detection and Classfication

Specification:

Input Voltage: 48V DC

Input Current: 1.5A maximum

Internal Input Fuse: Electronic Resettable Fuse

Input Connector (Power): 2pin Screw Terminal

Input Connector (Data): RJ45

Output Voltage (PoE): 48VDC (complies with IEEE802.3af)

Output Connector: RJ45 (Data & Power)

Max Wire Size: 2.5mm

2

Duty Cycle: 80% @ 25˚C

Dimensions: DIN Rail (W 160mm x H 110mm x D 62mm)

IP: Indoor use only

Listings: CE, FCC

PoE Classification Class 0 to Class 4 supported

Power Supply Options: (order separately)

Art-Switch PoE4 requires 48V DC to operate.

PSU Option

Number of Units

Case Style

PSU-48-1.25-DR

1

DIN-Rail

PSU-48-5-DR

3

DIN-Rail

PSU-48-10-DR

6

DIN-Rail

Note: When connecting a PSU to an Art-Switch care must be taken to ensure the correct cable is used and inductors are fitted close to

the unit if the environment has large switching loads in close proximity.

Copyright © Artistic Licence Engineering Ltd. All rights reserved.