HP OmniBook 800 Installation And Setup Manual
Download Installation and setup manual of HP OmniBook 800 CD/CDR Drive for Free or View it Online on All-Guides.com.
Changing the Configuration
Using the System Configuration Utility
4-10
Input/Output menu
COM Port
Sets serial port address and interrupt.
LPT Port
Sets printer port address and interrupt.
LPT Type
Sets printer port communication.
Keyboard Setup
“
Key Delay
”
sets how long you hold a key down before the character starts repeating.
“
Key Repeat Rate
”
sets how fast characters repeat.
“
Keyboard Numlock
”
sets whether Num Lock is active after rebooting.
External devices
“
VGA Display device
”
sets whether the built-in display is on or off when an external display is present.
(You can press FN+PrtSc at any time to cycle among the different display combinations.)
“
Force recognition of external VGA
”
overrides automatic detection of an external display. (You can press
FN+PrtSc at any time to cycle among the different display combinations.)
“
Enable External FN Key
”
lets you press CTRL+ALT instead of FN on an external keyboard with no FN key.
“
Ignore External Pointing Device
”
activates the built-in mouse when an external mouse is connected.
Audio Port
Basic Audio
“
Disable internal
”
turns off the internal sound chip, such as when using an external sound card.
Sets the volumes for the beeper signal and the sound speaker.
Advanced Audio
Sets system resources used by audio devices.
Video Stretched
On or Off. Expands video so a VGA-sized image fills the entire screen. (You can press FN+TAB at any time
to change this.)
Enable IrDA IR
On of Off. Makes the infrared port compatible with the IrDA standard.
Power menu
Power Controls
“
CPU Power Management
”
should be Maximum for greatest power savings.
“
Auto Turn-off w/Battery
”
and
“
HDD Power-down w/Battery
”
are automatic turn-off times.
“
Auto Turn-off w/AC
”
sets whether the computer turns off when the ac adapter is connected.
“
Enable audio power savings
”
lets the audio system turn off while it’s not busy.
Port Activity
Lets you select ports that don’t override automatic turn-off.
Defaults menu
Factory Default Settings
Resets all settings to defaults without exiting.
Restore Settings
Discards changes without exiting.
Exit menu
Save
Saves changes and exits.
Quit
Discards changes and exits.
Version Info
Shows the BIOS version.