Bogen CSD1X2VR Install Manual

Download Install manual of Bogen CSD1X2VR Speakers for Free or View it Online on All-Guides.com.

Brand: Bogen

Category: Speakers

Type: Install manual for Bogen CSD1X2VR

Pages: 1 (0.07 Mb)

Download Bogen CSD1X2VR Install manual

Bogen CSD1X2VR Install manual - Page 1
1
KNOCKOUT
CABLE
CLAMP
FEED
CABLE
SPEAKER
LEADS
50 Spring Street, Ramsey, NJ 07446,U.S.A
Tel. 201-934-8500, Fax: 201-934-9832, www.bogen.com
CEILINGTILE
CEILING GRID
SUPPORT RAIL CROSSBAR
Model CSD1X2
70V & 25V Spea
70V & 25V Spea
ker Systems
Electrical Connection
Ceiling Installation
2-YEAR WARRANTY
VR
The CSD1X2VR is warranted to be free from defects in material
or workmanship for two (2) years from the date of sale to the
original purchaser. This warranty does not extend to any of our
products that have been subjected to abuse, misuse, improper
storage, neglect, accident, improper installation or have been
modified or repaired or altered in any manner whatsoever,
or where the serial number or date code has been removed
or defaced.
Drop-In Ceiling Speaker
With Volume Control
(not included)
(on front panel)
Specifications subject to change without notice
54-2161-01B Made In China 0704
Control # 3092039
Lead Color
70V Red
25V Yellow
COM Black
TAP SELEC
T
OR
SWITCH
VOLUME CONTROL
1. Remove electrical box cover, then install
cable clamp (if desired) and feed interconnecting
cable into the electrical box.
2. Select speaker leads for desired system type:
70V - Red, 25V - Yellow, and COM - Black
for both. Interconnect the speakers in the
system, making sure that all leads of the same
color are connected together. Avoid swapping colors.
3. Cut bare wire tip off of unused speaker lead. Secure
all mechanical connections and re-install
electrical box cover.
4. Set tap selector switch to proper tap setting.
5. Speaker volume can be attenuated via front panel
recessed volume control.
1. For 2 ft. x 4 ft. tile space, cut ceiling tile to 35-1/ 2 " long.
For 2 ft. x 2 ft. tile space, cut to 11- 1/2" long.
2. Place speaker in ceiling opening.
3. Slide Tile Support Rail under speaker edge beside opening.
4. Drop in the tile.
SEISMIC
TETHER POINT
ELECTRICAL
BOX COVER
SUPPORT RAIL
CROSSBAR
©2007 Bogen Communications, Inc.