Bogen MB8TSL Installation Instructions
Download Installation instructions of Bogen MB8TSL Speakers for Free or View it Online on All-Guides.com. This version of Bogen MB8TSL Manual compatible with such list of devices, as: MB8TSL, MB8TSLVR, MB8TSQ, MB8TSQVR
Brand: Bogen
Category: Speakers
Type: Installation instructions
Model: Bogen MB8TSL , Bogen MB8TSLVR , Bogen MB8TSQ , Bogen MB8TSQVR
Pages: 2 (0.12 Mb)
1
2
Installation Instructions
1. Determine where the speaker(s) will be mounted. Ensure power is not connected to speaker wires prior to installation.
Follow all local safety and building codes and route speaker wires to desired wall or ceiling location. Pull approximately 12" of wire
through opening in mounting surface.
2. Pull speaker wire through the back of the large opening of the speaker enclosure. Using the supplied mounting hardware, secure
the enclosure to the mounting surface. Note that two toggle bolt/screws (for sheet rock surfaces) and two wood screws (for
securing to solid wood/beams) have been included. Utilize the two washers (supplied) as shown in Figure 1 with either toggle bolts,
wood screws, or other user supplied hardware.
MB8TSL, MB8TSQ, MB8TSLVR, MB8TSQVR
70V/25V Metal Box Speakers
For Surface Mounting to Walls and Ceilings
© 2005 Bogen Communications, Inc.
Specifications subject to change without notice.
54-2135-01B 0701
Use two of the enclosure mounting
holes as a template (diagonally
opposed), and mark screw hole
locations. If toggle bolts will be
used, drill two, 1/2" diameter holes
in the mounting surface, otherwise
drill a hole appropriate for hard-
ware being used.
Figure 1 - Sheet rocked ceiling mount example
Package Contents:
• Back box enclosure • Grille with speaker assembly
• Two crimp-type connectors • Two toggle bolt/screws
• Two wood screws • Two washers
• Four 1" screws for attaching grille assembly
Ceiling
Toggle bolts
(for sheet rock)
Enclosure mounting holes
Mounting bolts
and washers