HUSTLER 36 Specification Sheet
Download Specification sheet of HUSTLER 36 Lawn Mower for Free or View it Online on All-Guides.com.
1
Starter
12-volt, solenoid shift positive engagement
Ignition Electronic
Charging System
12-volt, 15-amp
Fuel
Unleaded gasoline with 87 or higher octane
Fuel Filter
Replaceable, automotive-type
Air Filter
Heavy-duty air cleaner to extend the service
interval for excessive, dirty applications and improved
performance
Cooling
Air cooled. Fly-wheel fan
Govenor Mechanical
Traction Drive System
Type
Dual hydrostatic. Hydro-Gear ZT2800 commercial-
duty pump/motor combination. Hydrostatic system
operates on 20W50 motor oil.
Transmission Drive
V-belt drive from engine crankshaft
Filter
Spin-on type
Ground Speed
Infinitely variable: 0-8 mph (0-12.87 kph)
forward, 0-6 mph (0-9.66 kph) reverse
Steering Twin-lever, SmoothTrak™ steering provides
independent control of each drive wheel. Speed, forward,
reverse, brake, and true zero-degree-radius turns are all
controlled with hand-operated controls
Turning Radius
True zero radius. Turns within its own
length. Counter-rotating, independent drive wheels
Brakes
Service Hydrostatic dynamic braking
Parking Sprocket and cog. When steering levers are
placed in neutral position, integral park brakes are
automatically engaged
Mower Drive
Single V-belt drive from engine with
electric clutch. Spring tension idler for extended belt life.
Tires
Front Casters 13 x 5.0 – 6, rib tread
Drive 20 x 8.0 – 10, turf tread on 36 in model
20 x 10.0 – 10, turf tread on 42 in model
Fuel Capacity 6 US gal (22.71 l) Site line in fueltanks
Seat Molded vinyl seat with armrest. Fore and aft
adjustment. Standard seat spring
PN 600944 12-07
H u s t l e r T u r f E q u i p m e n t • H e s s t o n , K a n s a s 6 7 0 6 2 • 1 - 8 0 0 - 3 9 5 - 4 7 5 7
Engine
Model Kawasaki Kai Kawasaki Kai
Horsepower 17 19
No. of Cylinders 2 2
Displacement 35.7 cu in (585 cc) 35.7 cu in (585 cc)
Compression Ratio 8.5:1 8.5:1
Max. Torque 36.2 ft lbs @ 2000 rpm 36.6 ft lbs @ 2000 rpm
Dimensions
Height 40 in (101.6 cm)
W/36 in Deck
Length: 74 in (187.96cm)
Overall width: 36 in (96.5 cm) w/discharge chute up
Tire-to-tire width: 35 in (88.9cm)
Weight: 650 lbs (294.84 kg)
W/42 in Deck
Length: 78 in (198.12 cm)
Overall width: 42 in (106.7 cm) w/discharge chute up
Tire-to-tire width: 38 in (96.5 cm)
Weight: 675 lbs (306.17 kg)
Deck Lift
Foot-operated deck height adjustment.
Pin for setting height, detent for transport position
Safety Features
Operator presence system connected to
deck and drive clutches. Stabilizer rollers at rear of tractor
Construction
Mainframe is 1.5 in x 1.5 in x .188 in
(3.8 cm x 3.8 cm x .32 cm) rectangular steel tubing
Drive motors mounted to .120 in (.45 cm) welded steel
Front caster wheels mounted with roller bearings on
each wheel
Front caster forks are .375 in (.95 cm) steel
Controls
Hand-operated choke/throttle, ignition switch,
electric mower clutch. Integrated parking brakes
Indicators
Hour meter, engine warning light
Cutting Heights 1.5 in to 4 in (3.81 cm to 10.16 cm) in
.25 in increments
Cup Holder Cup holder molded into the left side fuel
tank. Holds nearly any cup size including Big Gulp
™
Decks
36”, and 42” side-discharge decks
Type Free-floating mower using two blades. Mower is
suspended at the corners. Includes deck-mounted roll-
ers to improve flotation in rolling and uneven terrain.
FreeFlow
™
XR-7
™
deck technology for minimized buildup
of material under the deck and improved flow for awe-
some discharge pattern
Deck Lift Raise and lower deck from driver’s seat with
simple foot-operated deck height adjustment. Pin
for setting height, transport position. Change cutting
heights, hop curbs and trailer more easily.
Construction 7 ga, .179 in (.45 cm) welded steel with
11 ga, .125 in doubler welded onto spindle mount areas.
Solid 1.5 in x .5 in (3.81 cm x 1.27 cm) steel bars rein-
force impact areas on trim edges. Steel deck housing is 4
in (10.16 cm) deep which allows high-capacity mowing.
Cutting Heights Foot-operated deck height adjustment.
Pin for setting height, detent for transport position.
Height adjustment in .25 in increments from 1 in to 5 in
(2.55 cm to 12.7 cm).
Mowing Blades Heavy-duty, heat-treated, high-lift
steel Fusion
™
blades feature an exclusive electo-fusion
technology that creates an ultra-hard layer at the blade’s
cutting edge. This means the blade remains sharp and
continues to give a clean cut far longer than any blade
you’ve ever used before.
36 in: 1-13.75 in x 2.5 in x .20 in and
1-20.5 in x 2.5 in x .20 in
42 in: 2-20.5 in x 2.5 in x .20 in
Blade Tip Speed 36 in: 18,600 fpm
42 in: 18,400 fpm
Blade Drive V-belt drive to spindles. Spring idler tension
pulleys.
Spindles Machine aluminum housing, 1 in (2.5 cm)
diameter high carbon steel shafts & sealed ball bearings.
Flotation Suspended mower floats on spring-assisted
chains. 2 anti-scalp wheels are standard.
Width of Cut 36 in: 33.5 in (85.09 cm)
42 in: 40.25 in (102.24 cm)
Trim Capacity (left side) 36 in: .5 in (1.27 cm)
42 in: 2.25 in (5.75 cm)
Accessories
Mulch Kit Recycles clippings under deck allowing clip-
pings to be cut and recut, then discharged down into
the grass.
Flex Forks™ Shock-absorbing front caster forks for a
smooth cut and an even smoother ride.
Steering Lever Extension Kit, Hitch Kit
Specifications subject to change without notice.
F o r m o r e i n f o r m a t i o n : w w w . h u s t l e r t u r f . c o m