Bose 201 Owner's Manual

Download Owner's manual of Bose 201 Series Speaker, Speakers for Free or View it Online on All-Guides.com.

Brand: Bose

Category: Speaker , Speakers , Speaker System

Type: Owner's manual

Model: Bose 201 Series , Bose 301 Series , Bose Series V

Pages: 21 (1.8 Mb)

Download Bose 201 Series Owner's manual

Bose 201 Series Owner's manual - Page 1
1
Bose 201 Series Owner's manual - Page 2
2
Bose 201 Series Owner's manual - Page 3
3
Bose 201 Series Owner's manual - Page 4
4
Bose 201 Series Owner's manual - Page 5
5
Bose 201 Series Owner's manual - Page 6
6
Bose 201 Series Owner's manual - Page 7
7
Bose 201 Series Owner's manual - Page 8
8
Bose 201 Series Owner's manual - Page 9
9
Bose 201 Series Owner's manual - Page 10
10
Bose 201 Series Owner's manual - Page 11
11
Bose 201 Series Owner's manual - Page 12
12
Bose 201 Series Owner's manual - Page 13
13
Bose 201 Series Owner's manual - Page 14
14
Bose 201 Series Owner's manual - Page 15
15
Bose 201 Series Owner's manual - Page 16
16
Bose 201 Series Owner's manual - Page 17
17
Bose 201 Series Owner's manual - Page 18
18
Bose 201 Series Owner's manual - Page 19
19
Bose 201 Series Owner's manual - Page 20
20
Bose 201 Series Owner's manual - Page 21
21
6
Setting Up
Make the connections
Just press the terminal tab on the back of each speaker to insert the appropriate wire (Figure
3).
CAUTION: Before making any connections, turn off your receiver and unplug it from the AC
power (mains) outlet. Not doing so may result in damage to your system.
CAUTION: Never use broken or frayed wiring, which can result in electrical shock or damage.
1. Connect one speaker cord to your right speaker.
Attach each marked wire (+) to the appropriate (+) terminal.
Attach each plain wire (–) to the appropriate (–) terminal.
2. Connect the other end of the same cord to the RIGHT SPEAKER OUTPUT of your
receiver.
Attach each marked wire (+) to the appropriate (+) terminal.
Attach each plain wire (–) to the appropriate (–) terminal.
3. Connect the second cord to the left speaker and LEFT SPEAKER OUTPUT. Follow the
steps in 1 and 2 above.
Figure 3
How to make terminal con-
nections
Test the speakers
To make sure your speakers operate correctly:
1. Turn on your receiver. Set the receiver to MONO (monophonic), if that is an option on your
receiver.
2. Make sure that all special effects (such as surround sound) are turned off.
3. Set the balance control to normal (center position).
4. Play some deep bass passages of music through the speaker.
The sound should seem to come from a point between the two speakers. The bass should be
full and natural. If it is not, one of the connections may be reversed, causing the speakers to
play out of phase (refer to “Make the connections” above).
To correct the problem, make sure all the wires are connected positive to positive (+ to +) and
negative to negative (– to –). Then repeat steps 1 through 4 above to re-test the speakers.
+
+
+
Red
Black
Red
Black
301
®
series V 201
®
series V