ACV HeatMaster HM 200 N Technical Specification
Download Technical specification of ACV HeatMaster HM 200 N Boiler for Free or View it Online on All-Guides.com.
Brand: ACV
Category: Boiler
Type: Technical specification for ACV HeatMaster HM 200 N
Pages: 8 (1.03 Mb)
1
2
3
4
5
6
7
8
5
TECHNICAL SPECIFICATION
EFFECTIVE DIMENSIONS
The appliances delivered are factory-tested. Upon receipt, remove the packing and check that there is no damage to the appliances. Refer to the
dimensions and weights listed below for transport purposes.
The jacket is fitted by the installer on site
(see the assembly instructions in the wooden protective casing).
A
G
H
B
250
190
250
302
338
E
C
D
F
506
HM 200 N HM 200 F
Fuel type Fuel / Gas Fuel
Input kW 154.0 196.0
Output kW 141.7 180.3
Maintenance loss of nominal value at 60°C % 0.43 0.34
Total capacitye L 641 641
Primary circuit capacity L 241 241
Hot water connection Ø 2” 2”
Heating connection Ø 2” 2”
Chimney connection Ø mm 250 250
Water tank heat transfer surface m
2
5.30 5.30
Drained weight Kg 530 550
Pressure loss of the primary circuit mbar 240 240
Combustion efficiency % 93.5 93.7
Output CO2 % 12.8 12.9
Net temperature of the flue gases °C 143 140.5
Mass flow rate of combustion products g/sec. 65.2 83.0
Nozzle (Fuel oil) gal/h 3.25 / 60° B 4.00 / 60° B
Pump pressure (Fuel oil) bar 11.0 11.6
A mm B mm C mm D mm E mm F mm G mm H mm
HeatMaster
®
200 N 2085 - 1020 - 1020 600 1383 590
HeatMaster
®
200 F 2085 190 1020 1210 1020 600 1383 590
GENERAL CHARACTERISTICS
(*) The HeatMaster
®
200F outputs can only be reached if the boiler is fitted with a “RIELLO” RG4S 396 T1 fuel oil burner.