Sony USM1GL Operating Instructions
Download Operating instructions of Sony USM16GL Accessory, Storage for Free or View it Online on All-Guides.com. This version of Sony USM16GL Manual compatible with such list of devices, as: USM16GL, USM1GL, USM2GL, USM4GL, USM8GL
Brand: Sony
Type: Operating instructions
Model: Sony USM16GL , Sony USM1GL , Sony USM2GL , Sony USM4GL , Sony USM8GL
Pages: 5
1
2
3
4
5
SON~
2-550-371-51 (1)
When
running
Mac OS 9.0
and
higher
Once
the Micro Vault is
connected
to the computer, the drive icon for the Micro Vault
device
appears.
*
The
Micro Vault does not support Mac
OS
IO.Ox.
You can
now
copy
and
save
data
on
the Micro Vault by
dragging
files and folders
on
the drive
icon,just
as you
would when
copying
data
to a hard disk
or
to a floppy disk.
USB
Flash
Drive
Meanings
of
the
Indicator
Light
When
the
Micro
Vault is in use. the indicator light indicates its status as follows.
Indicator Light Status Meaning
Operating Instructions
Off
On
Standby
Data transfer
in
progress
(Do
not
remove
the
Micro
Vault while the indicator
light is flashing.)
USM1GU2GU4GUBGU16GL
© 2008 Sony Corporation Printed in Taiwan
English
Disconnection
When
running
Windows
Vista,
Windows
XP
or
Windows
2000
Double-click
~
(Safely
Remove
Hardware)
in the task tray in the
lower
right portion
of
the screen.
In
the
window that appears. select the name
of
the device that is to be removed, then click the Stop bUllon.
When
the
Stop
a Hardware Device screen appears,
make
sure that the correct information is displayed.
and
then click the
OK
bulton.
When
the
"Safe
to
Remove
Hardware"
message appears. you may
remove
the Micro Vault. (The
icon
and
messages that
appear
may vary
depending
on the version
of
the
OS.)
When
running Windows Vista.
you
can also select
"Safely
Remove
Hardware"
by
right-clicking the
Micro
Vault drive icon in
Explorer
or
My
Computer.
When
removing the
Micro
Vault while Virtual Expander is running, be sure to
end
the program first by right-
clicking the Virtual
Expander
icon in the task tray
and
selecting
"End"
from the menu that appears.
When
running
Mac OS 9.0 and
higher
Drag the Micro Vault icon to the Trash.
After
confirming
that the Micro Vault is
in
standby mode, disconnect
the Micro Vault.
*
The
Micro Vault does not support Mac
OS
IO.Ox.
- dusty
or
diny
- vibrating
-
exposed
to direct sunlight
Notes
on
Use
About
Micro Vault Virtual Expander software
•
This
software is pre-installed in the Micro Vault.
•
This
is compression software originally designed for the Micro Vault.
For
marc
details
on
its use, see the
README
file stored in the Micro Vault.
•
The
compression ratio will differ
depending
on
the file.
• Files that have ulready been
compressed
and
file~
of
2 KB
or
less
are
~a\'ed
unchanged. without being
compressed.
If
the software
become~
unstable during use, visit the following URL to download the
late~t
version.
Only
products with Micro Vault Virtual Expander installed at the time
of
purchase can download from this
Web
site.
hnp:/lwww.sony.netlProductslMediaIMicrovaultl
Supported OS:
Windows
Vista (32BiO.
Windows
XP
(SPI and higher),
Windows
2000
(SP3
and
higher)
Administrative right is required to use this software.
• Our product warranty is limited only to the USB Flash Drive itself, when used normally
in
accordance with these operating instructions and with the accessories that were included with
this unit
in
the specified or recommended system environment. Services provided by the
Company, such as user support, are also
SUbject
to these restrictions.
• The Company cannot accept liability for damage or loss resulting from the use of this unit. or for
any
claim
from
a
third
party.
• The Company cannot accept any liability for: problems with your computer or other hardware
arising from the use of this product; the suitability of this product for specific hardware, software,
or peripherals; operating conflicts with other installed software; data loss; or other accidental
or
unavoidable damages.
• The Company cannot accept any liability for financial damages, lost profits. claims from third
parties, etc., arising from the use of the software provided with this unit.
• The software specifications may be
SUbject
to change without notice.
It
is strongly recommended that you periodically back up the data written on the unit.
Sony
Corporation
assumes
no liability for any
damage
or
loss
of
data
that may occur.
•
When
formatting the device, use the format software which you
can
download
from the website.
To
avoid
any
changes
of
the specifications,
do
not
fonnat
the
device
in
any
other
way.
•
The
Micro
Vault may not function correctly
if
it
is
connected
to the
computer
when the
computer
is
staned
up, restarted.
or
restored from sleep mode.
Always
disconnect the Micro Vault from the
computer
before
performing
any
of
these operations.
•
The
Micro Vault has a hole for attaching a strap
or
a ring. However. a hook-shaped metal object (such as a
key holder) should not
be
attached to this hole. because it may
cause
damage
to the Micro Vault.
•
Do
not place the unit in locations that are:
-
extremely
hot
or
cold
- very humid
-
exposed
to corrosive
gases
•
Cleaning
Clean
the unit with a soft. dry cloth
or
a
soft
cloth lightly moistened with a mild detergent solution.
Do
not use any type
of
solvent. such
a<;
alcohol
or
benzene. which may
damage
the finish.
Micro
Vault
is
a trademark
of
Sony
Corporation.
Microsoft, Windows, and Windows Vista are registered trademarks of Microsoft Corporation
in
the
United States and other countries.
Mac
and
Macintosh
are
trademarks
ot
Apple
Compuler,
Inc
..
regislered
in
the
U.S.
and
other
countries.
• Other system names and product names that appear in this manual are registered trademarks
or
trademarks of their respective owners. Note that the ™ and ® symbols are not used
in
this manual.
Precautions
for
Transfer
and
Disposal
If
data
stored
on
the Micro Vault is deleted
or
refonnatted
using the standard methods. the data only appears to
be
removed
on
a superficial level,
and
it may be possible for
someone
to retrieve
and
reuse the
data
by means
of
special software.
To
avoid information leaks and
other
problems
of
this sort,
it
is recommended that you use
commercially
available software designed to completely remove all
data
from the
Micro
Vault.
Declaration
of
Conformity
:
SONY
:
USM
I
GL.
USM2GL. USM4GL, USM8GL,
USM
1
6GL
:
Sony
Electronics Inc.
: 16530 Via
E,prillo.
San Diego,
CA
92127 U.S.A.
: 858-942-2230
Trade
Name
Model
Responsible Party
Address
Telephone
Number
Model
No.
USMIGL,
USM2GL,
USM4GL, USM8GL,
USMI6GL
Serial No. _
For
Customers
in
the
U.S.A.
If you have any questions about this product. you may call:
Sony
Customer
Information
Center
1-800-942-S0NY(7669).
The
number
below is for the
FCC
related matters only.
Regulatory
Information:
WARNING
Keep away
from
children.
If
swallowed,
promptly
see a
doctor.
To reduce the
risk
of
fire
or
electric
shock,
do
not
expose
this
apparatus
to
rain
or
moisture.
To avoid electrical
shock,
do
not
open
the
cabinet. Refer
servicing
to
qualified
personnel only.
Owner's
Record
The model number and serial number are located on the side
of
the product. Record the serial number
in
the
space provided here. Refer to the model
and
serial
number
when you call the
Sony
Customer
Information
Center.
This
device complies with
pan
15
of
the
FCC
rules. Operation is subject to the following two conditions:
(I)
This device may not cause harmful interference.
and
(2)
this device must accept any interference
received, including intetference that may
cause
undesired operation.
When Using USB Flash Drive
for
the First Time (Installing the Device
Driver)
Ordinarily. the device driver is installed automatically when you connect the Micro Vault.
However. with
some
USB 2.0 cards
or
boards, you may need to initiate installation manually.
Follow the instructions displayed
on
the screen to search for a suitable driver.
Note:
Windows 98, Windows
98SE.
Windows
Me
and
Mac
OS
IO.Ox
are not supported.
Basic Operation
Note:
Please remove the Micro Vault properly following the procedure described
in
this manual. Otherwise.
data
may
not
be
recorded correctly.
CAUTION:
You are cautioned that any changes
or
modifications not expressly
approved
in this manual
could
void
your
authority to operate this equipment.
Note:
This equipment has been tested and found to
comply
with the limits for a Class B digital device. pursuant to
pan
15
of
the
FCC
Rules.
The~
limits are designed 10 provide reasonable protection against harmful
interference
in
a residential installation. This
equipment
generates. uses and
can
radiate radio frequency energy
and, if not installed
and
used in accordance with the instructions. may
cause
harmful interference to radio
communications. However, there is no guarantee Ihat interference will not
occur
in
a particular installation.
If
this equipment does cause hamlful interference to radio
or
television reception. which
can
be
determined
by
turning the equipment
off
and on. the user is encQumged to try to correct the interference by one
or
more
of
the
following measures:
- Reorient
or
relocate the receiving antenna.
- Increase the separation between the equipment
and
receiver.
- Connect the equipment into an outlet
on
a circuit different from that to which the
receiver
is connected.
- Consult the
dealer
or
an experienced
radiorrV
technician for help.
The
shielded interface cable and connectors must
be
used
in
order
to
comply
with the limits for digital
device
pursuant to subpart B
of
Part
15
of
FCC
Rules.
For
Customers
in
CANADA
This
Class
B digital appamtus
complies
with Canadian ICES-Om.
Setup
While holding the body
of
the Micro Vault. depress the top to
extend
the USB.
This
action locks the USB
and
makes
it
ready for use in a USB port.
When
running
Windows
Vista,
Windows
XP
or
Windows
2000
Once the Micro Vault
is
connected to the
computer.
the drive icon for the Micro Vault device appears. (The
drive name varies, depending on
your
computer
system.)
You can now
copy
and
save
data
on the Micro Vault
by
dragging
files
and
folders on the
drive
icon,
just
as you
would when copying
data
to a hard disk
or
to a floppy disk.