12118101
Unpacking
1. When receiving the unit, inspect carefully
for any damage that may have occurred
during transit.
2. Before installing, rotate the propeller to
be sure there are no obstructions which
would interfere with proper operation.
Adjust as required.
General Safety Infor
mation
Do not depend on
any switch as sole means of
disconnecting power when installing or servicing the fan.
If the power disconnect is out-of-sight, lock it in the
open position and tag to prevent application of power.
Failure to do so may result in fatal electrical shock.
Lors de
l’installation ou d’une
réparation du ventilateur, ne pas compter sur un
sélecteur comme seul moyen de coupure de
l’alimentation électrique. Si l’interrupteur d’alimentation
est hors de vue, le verrouiller en position d’arrêt et
apposer une plaquette interdisant son utilisation. À
défaut, un choc électrique pourrait être fatal.
1. Follow all local electrical and safety codes in
the United States and Canada, as well as
the National Electrical Code (NEC) and the
Occupational Safety and Health Act (OSHA)
in the United States, and the Canadian
Electric Code (CEC) in Canada.
Do not touch motor.
May be hot enough to
cause injury.
2. Motor must be securely and adequately
grounded. This can be accomplished by
wiring with a grounded, metal-clad raceway
system, by using a separate
Shutter-Mounted
Exhaust Fans
O
perating Instructions & Parts Manual
2SHE07 thru 2SHE36
Please read and save these instructions.
Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by
o
bserving all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Description
Designed to ventilate stores, offices, factories, shops, farm buildings, etc. Efficient, easy-to-
install exhaust fan with automatic shutters. 7” to 36” diameter deep pitched propeller. Steel
intake guard complies with United States OSHA Federal 1/2” max. opening requirement. Wire
guard has charcoal gray metallic polyester finish to resist corrosion.
NOTE: These units are
designed for wall mounting only.
Optional Accessories: Speed controllers, 3 amp model
5ACC03SC, 5 amp model 5ACC05SC, 6 amp model 5ACC06AC, and 10 amp model 5ACC10SC.
Dimensions
Propeller
Model Dia. A Sq. B C Sq.
2SHE0721* 07” 11
1
/8”
4
15
/16”
08”
2SHE1021* 10 13
1
/8 5
9
/16 10
2SHE1221* 12 15
1
/8 6
12
2SHE1661* 16 19
1
/8 6
1
/2 16
2SHE1871* 18 21
1
/8 8
3
/4 18
2SHE18B1 18 21
1
/8 12
1
/2 18
2SHE20B1W* 20 23
1
/8 12
1
/8 20
2SHE20B1X 20 23
1
/8 12
1
/8 20
2SHE20B1Y 20 23
1
/8 11
9
/16 20
2SHE20C1 20 23
1
/8 12
1
/8 20
2SHE24B1W* 24 27
1
/8 11
13
/16 24
2SHE24B1X 24 27
1
/8 12
5
/16 24
2SHE24C1G 24 27
1
/8 12
5
/16 24
2SHE24C1H‡ 24 27
1
/8 13
5
/8 24
2SHE30C1 30 33
1
/8 13
1
/8 30
2SHE36D1 36 39
1
/8 13
1
/8 36
(*) Speed controllable. (‡) Two speed.
A Sq.
3
9
/16”
1/4 x 1/2” Slots
Air Flow
3”
B
5
3
/4”
C Sq.
F
antech, Inc. and Systemair Mfg. certify
that the ventilators shown herein are
licensed to bear the AMCA Seal. The
r
atings shown are based on tests and
procedures performed in accordance with
A
MCA Publication 211 and AMCA
Publication 311 and comply with the
requirements of the AMCA Certified
R
atings Program.
Figure 1 - Dimensions
