Dell Wyse ThinOS C10LE Administrator's Manual
Download Administrator's manual of Dell Wyse C10LE Desktop, Modem for Free or View it Online on All-Guides.com. This version of Dell Wyse C10LE Manual compatible with such list of devices, as: Wyse C10LE, Wyse ThinOS D10DP, Wyse ThinOS R10L, Wyse ThinOS T10, Wyse ThinOS V10LE
Brand: Dell
Category: Desktop , Modem , Server
Type: Administrator's manual
Model: Dell Wyse C10LE , Dell Wyse ThinOS D10D , Dell Wyse ThinOS D10DP , Dell Wyse ThinOS R10L , Dell Wyse ThinOS T10 , Dell Wyse ThinOS T10D , Dell Wyse ThinOS V10LE
Pages: 94
24 Chapter 3
Refresh rate list selections include:
60 Hz (default)
75 Hz
85 Hz
• Rotation - Select a rotation option (either None or Right turn 90 degrees).
• Desktop Color - Select the Desktop Color (either 16 bit or 32 bit).
• Usage Help area - Contains brief instructions for using the Display dialog box and
running the test. No operator entry can be made in this box. Make note of the
instructions in the area regarding v-key reset usage in case of display failure.
Use the following guidelines for the Dual Head tab (Supported Dual Monitor Capable
Thin Clients Only):
• Dual Head - Select Mirror Mode to have the two monitors work in a matching state,
or Span Mode to have the two monitors work separately (second is extended from
first).
• Main Screen - Select which of the two monitors you want to be the main screen
(Screen1 or Screen2). The other screen is extended from the main screen. Note that
when using a DVI to DVI/VGA splitter with VGA and DVI monitors at the same time,
the VGA monitor will be the primary monitor.
• Layout - Select how you want the two monitors to be oriented to each other
(Horizontal where you mouse between the monitors from the left and right of the
screens or Vertical where you mouse between the monitors from the top and
bottom of the screens).
• Alignment - Select how you want the monitors to be aligned (Bottom, Center, or
Top). Bottom means screens are bottom-aligned in a horizontal orientation; Center
means screens are center-aligned; Top means screens are top-aligned in a
horizontal orientation.
• (Classic Desktop Only) Taskbar - Select under which screen you want the Taskbar
to appear (Whole Screen or Main Screen).
(Gamma Supported Monitors Only) Use the Gamma Setup tab to adjust the saturation
values for Red, Green and Blue on VGA connected monitors supporting gamma
settings if you feel the default settings are too light. Be aware that the Gamma Setup tab
will be disabled once you click Save+Exit. You can enable it again by setting
rgamma={1-100} ggamma={1-100} bgamma={1-100} in the Resolution INI parameter
(see Reference Guide: Wyse ThinOS
TM
INI Files).