Dell Z9000 Installing
Download Installing of Dell Z9000 Network Router, Switch for Free or View it Online on All-Guides.com.
Install the Z9000 | 17
4
Install the Z9000
To install the Z9000 system, Dell Force10 recommends that you complete the installation procedures in
the order presented below.
Always handle the system and its components with care. Avoid dropping the Z9000 switch or its field
replaceable units.
1
Install the Z9000 chassis in a rack or cabinet
a
Attach mounting brackets
b
Install chassis into rack or cabinet
2
Attach ground cable
3
Install the QSFP+ optics
•
Splitting QSFP ports to SFP+ ports
4
Install the Solid Date Drive
5
Supply power and power up the system
WARNING: Always wear an ESD-preventive wrist or heel ground strap when handling the Z9000 and its
components. As with all electrical devices of this type, take all the necessary safety precautions to prevent
injury when installing this system. Electrostatic discharge (ESD) damage can occur if components are
mishandled.
Install the Z9000 chassis in a rack or cabinet
Attach mounting brackets
The Z9000 is shipped with mounting brackets (rack ears) and required screws for rack or cabinet
installation. The brackets are enclosed in a package with the chassis.