Dell Z9000 Installing
Download Installing of Dell Z9000 Network Router, Switch for Free or View it Online on All-Guides.com.
26 | Power Supplies
www.dell.com | support.dell.com
CAUTION: Be sure that the DC power source is turned OFF before attaching the cables to the DC connectors
on the Z9000.
Power Supply 0 (PSU0) is on the top; Power Supply 1(PSU1) is on the bottom.
Install a new AC power supply
Figure 5-1. AC Power Supply
To install a new power supply, follow the steps below:
The power supply modules should slide into the slots smoothly. Do not force a module into a slot. This
may damage the power supply or the Z9000 chassis.
Install a new DC power supply
Figure 5-2. DC Power Supply
Step Task
1 Take the power supply unit out of the shipping box.
2 Using the grab handle, slide the unit into the power supply bay.
3 Tighten the securing screw on the side of the PSU.
4 Attach power cables.
5 The system powers up as soon as the cables are connected between the power supply and the power source.
PSU1
PSU0
Fan Modules
Cable
Connector
Grab
Handle
Securing
Screw
DC cable
connectors
Grab
Handle
PSU1
PSU0
Fan Modules
Securing
Screw