Linksys Sipura Installation Instructions
Download Installation instructions of Linksys PAP2 Adapter, Network Card for Free or View it Online on All-Guides.com.
Brand: Linksys
Category: Adapter , Network Card , Network Router , Telephone Accessories
Type: Installation instructions
Model: Linksys PAP2 , Linksys Sipura
Pages: 5
Linksys Sipura and PAP2 Analog Telephone
Adapter (ATA) - Installation Instructions
Below you will find installation instructions for the Linksys Sipura-200X or PAP2 broadband phone
adapter.
Setting up your Linksys ATA to work with KONTACT+ phone network is easy! The following
instructions will help you set up your adaptor in a simple Step-by-Step method.
Introduction: How does broadband phone work?
Step 1: Connect ATA to your Broadband connection
Step 2: Verify & Configure your IP address
Step 3: Prepare you device to work with phone network
Step 4: Complete the Setup-Wizard
Step 5: Start using your ATA with KONTACT+ phone network
Introduction: How should the broadband adaptor connect to your
network?
You must have a broadband Internet connection and the Linksys ATA. Since the adaptor works
independently of your computer, there are no requirements at all for your operating systems.
In some case you will not necessarily need a router if your cable modem has 2 Ethernet ports and supports
NAT.
Routers and Broadband service are not sold through KONTACT+ phone network. Routers are generally
available from most retail or online stores.
Please follow the following step-by-step guide below to setup your Linksys ATA to work with
KONTACT+ phone network Broadband Phone Service.