HP 7470A Interfacing And Programming Manual
Download Interfacing and programming manual of HP 7470A Plotter for Free or View it Online on All-Guides.com.
A description of the instruction’s parameters follows:
<DEC> The first parameter is optional. If present, it is the
intercharacter delay. Thedelayimplementedis ((parame
ter X 1.1875)mod65 536)/ 1.2milliseconds. The parameter
range is 0 to 54 612. If parameters follow, the semicolon
must be included, even if this decimal parameter is
omitted.
<ASC> . . . <ASC> This parameter is optional. If present, it is a list
of the decimal equivalents of 1 to 10 ASCII characters
in the range 0 to 127.For Xon-Xoff handshake mode,
it specifiesthe Xofftrigger character(s). Forenquire/
acknowledge handshake mode, it specifiesthe imme
diate response string. Semicolonsmust separate each
parameter in the list.
EXAMPLES
For Xon-XoffHandshake
. N;19: Sets the Xoff trigger character to DC3. There will be no
intercharacter delay, since the first parameter is defaulted to zero by
the semicolon.
For Enquire/Acknowledge Handshake
The examples given here include all handshaking instructions. In
addition to illustrating the use of intercharacter delays and immediate
response strings set by ESC . N, they are designed to clarify the
difference between handshake mode 1 and'mode 2 and give some
insight into why certain values are logical choices for some parameters.
Note the CHR$ function is used to send the escape character. I
10 DIM DUT$(80)
:30 PRINTCHR$(2?);".M0;B3;O;13:";CHR$(2?);".N5:"
so PRINT CHR$(2?);".H80;1B;4&3:"
so 0UT$="IN;SF'1;PR500,500;" :«-sosus 100
l00 PRINT CHR$(18): INPUT 2: PRINT DUT$: RETURN
The following parameters are set in lines 40 and 50:
turnaround delay = 0,
output trigger character = ? (decimal equivalent 63),
no echoterminate character,
10-36 RS-232-C/CCITT V.24INTERFACING