HP J7974E Administrator's Manual
Download Administrator's manual of HP J7974E Print Server for Free or View it Online on All-Guides.com. This version of HP J7974E Manual compatible with such list of devices, as: J7974E, J7982E, J7987E, J7991E, J7993E
Brand: HP
Category: Print Server
Type: Administrator's manual
Model: HP J7974E , HP J7979E , HP J7982E , HP J7987E , HP J7990E , HP J7991E , HP J7992E , HP J7993E
Pages: 186
When all the desired services for this template have been specified on the Create Service Template
page, click OK to add the template on the Step 2 - Specify Service Template page. Then select the
desired service template and click Next.
Table 5-6 Manage Custom Services page
Item Description
Name Use the edit field to enter a name for the custom service.
NOTE The custom service name must be unique.
Protocol Select a protocol for this custom service. The default protocol is TCP.
Local Service Select the well-known port or port range on the HP Jetdirect print server that this service
will use. Depending on the desired service, select Single Port and enter an applicable
port number, or select Port Range and enter the port range in the fields provided.
Remote Service Select the ports on the remote hosts that this service will use. Depending on the service,
select Single Port, or Port Range, then enter the port or port range in the fields
provided.
Configured Custom Services This list identifies the custom services that have been configured. Once a custom
service has been created, click Add to add the service into this list.
To remove a service from this list, select it and click Delete.
Specify Action
For the addresses and services specified for this rule, select an action for the print server. Selectable
actions on this page depend on whether IPsec is supported.
●
Allow traffic. (If IPsec is supported, allow IP traffic that is not protected by IPsec.)
●
Drop traffic. Do not process (discard) the specified IP traffic.
●
Require traffic to be protected with IPsec. This option appears if IPsec is supported. For this action,
you will be prompted to configure an IPsec template, that is, the IPsec authentication/encryption
settings to be applied to the specified IP traffic. See Step 3 below.
Step 3 - Specify IPsec Template
Any IPsec templates available for a rule will be listed in the IPsec Templates field. If none are available,
you must click New to create a custom template using the Create IPsec Template page described
below. Because IPsec templates are network dependent, predefined factory-default templates are not
included.
To view or delete a listed template, select it and click View or Delete as appropriate.
After an IPsec template has been configured in the list and selected, click Next to complete the rule.
Create IPsec Template
Use this page to create an IPsec template and to specify how Security Associations (SAs) will be created:
manually or dynamically. Items on this page are described below.
100 Chapter 5 IPsec/Firewall Configuration (V.34.xx) ENWW