HP J7974E Administrator's Manual
Download Administrator's manual of HP J7974E Print Server for Free or View it Online on All-Guides.com. This version of HP J7974E Manual compatible with such list of devices, as: J7979E, J7982E, J7990E, J7991E, J7993E
Brand: HP
Category: Print Server
Type: Administrator's manual
Model: HP J7974E , HP J7979E , HP J7982E , HP J7987E , HP J7990E , HP J7991E , HP J7992E , HP J7993E
Pages: 186
Message Description
Generic Drops:
Displays the number of packets dropped that are not counted by other statistics.
ESP (Rx/Tx): Displays the total number of Encapsulating Security Payload (ESP) packets received
(Rx) and transmitted (Tx) by the print server.
AH (Rx/Tx): Displays the total number of Authentication Header (AH) packets received (Rx) and
transmitted (Tx) by the print server.
Total (Rx/Tx): Displays the total number of all packets received (Rx) and transmitted (Tx) by the print
server.
IKE Stats
This section provides Internet Key Exchange (IKE) statistics for the print server.
Message Description
Phase 1 Failures: Displays the number of authentication failures when the print server is establishing a
connection over IPsec, which result in connection failures.
Quick Mode After authentication, this item displays the number of failures during IPsec protocol
configuration, which results in connection failures.
Rekeys: Displays the number of times keys have been regenerated (for example, after a key
lifetime setting has been exceeded and then regenerated).
IKE Connections OK (1/Q): Displays the number of successful IPsec connections for both Phase 1 and Quick Mode
attempts, separated by a slash (Phase 1 count / Quick Mode count).
IPsec Rules
This section of the Security page identifies the IPsec Policy of the print server. The IPsec Policy consists
of rules that control the security of the traffic received and transmitted by the print server. Rules are
configured using an IPsec configuration wizard accessed through the print server's embedded Web
server. Up to ten rules can be configured.
The heading of this section will indicate the default rule for IPsec traffic:
●
Pass: The default IPsec rule is configured to allow all non-IPsec traffic.
●
Drop: The default IPsec rule is configured to drop all non-IPsec traffic.
For each rule configured, the names of the IP address template, service template, and IPsec template
that define the rule will be displayed. For more information, see
IPsec/Firewall Configuration (V.
34.xx).
IPsec SA Table
The IPsec SA Table lists the Security Associations (SA) of cached IPsec sessions between two hosts.
For active sessions, all security associations detected will be listed in the table. If required, multiple
pages will be printed.
Table 8-15 IPsec Statistics (continued)
ENWW Security Configuration Page 139