HP J7974E Administrator's Manual
Download Administrator's manual of HP J7974E Print Server for Free or View it Online on All-Guides.com. This version of HP J7974E Manual compatible with such list of devices, as: J7974E, J7982E, J7991E, J7992E, J7993E
Brand: HP
Category: Print Server
Type: Administrator's manual
Model: HP J7974E , HP J7979E , HP J7982E , HP J7987E , HP J7990E , HP J7991E , HP J7992E , HP J7993E
Pages: 186
Menu Item Submenu Options Additional Options Description of settings
MANUAL
SETTINGS
(Available only if CONFIG METHOD is set to MANUAL)
Configure parameters directly from the printer control
panel:
●
IP ADDRESS n.n.n.n: The unique IP address of the
printer, where n is a value from 0 to 255.
●
SUBNET MASK m.m.m.m: The subnet mask for the
printer, where m is a value from 0 to 255.
●
SYSLOG SERVER n.n.n.n: The IP address of the
syslog server used to receive and log syslog
messages.
●
DEFAULT GATEWAY n.n.n.n: The IP address of
the gateway or router used for communications with
other networks.
●
IDLE TIMEOUT: The time period, in seconds, after
which an idle TCP print data connection is closed
(default is 270 seconds, 0 disables the timeout).
DEFAULT IP Specify the IP address to default to when the print server
is unable to obtain an IP address from the network during
a forced TCP/IP reconfiguration (for example, when
manually configured to use BootP or DHCP).
●
AUTO IP: A link-local IP address 169.254.x.x will be
set.
●
LEGACY: The address 192.0.0.192 will be set,
consistent with older Jetdirect products.
PRIMARY DNS Specify the IP address (n.n.n.n) of a Primary DNS
Server.
SECONDARY DNS Specify the IP address (n.n.n.n) of a Secondary Domain
Name System (DNS) Server.
IPV6 SETTINGS ENABLE Use this item to enable or disable IPv6 operation on the
print server.
ON: IPv6 will be enabled.
OFF: IPv6 will be disabled.
ADDRESS Use this item to manually configure an IPv6 address.
MANUAL SETTINGS: Use the MANUAL SETTINGS
menu (see the additional options under IPV6
SETTINGS) to enable and manually configure a TCP/
IPv6 address.
LINK-LOCAL: Use this item to display the IPv6 link-local
address configured on the print server.
DHCPV6: If available, use this item to display stateful
IPv6 addresses controlled by a DHCPv6 server.
ROUTER SPECIFIED: If available, use this item to
display stateless addresses associated with a router.
DHCPV6 POLICY
ROUTER SPECIFIED: The stateful auto-configuration
method to be used by the print server is determined by
Table C-1 HP Jetdirect Control Panel Menu (continued)
ENWW Parameter Descriptions 159