HP J7974E Administrator's Manual
Download Administrator's manual of HP J7974E Print Server for Free or View it Online on All-Guides.com. This version of HP J7974E Manual compatible with such list of devices, as: J7979E, J7982E, J7990E, J7992E, J7993E
Brand: HP
Category: Print Server
Type: Administrator's manual
Model: HP J7974E , HP J7979E , HP J7982E , HP J7987E , HP J7990E , HP J7991E , HP J7992E , HP J7993E
Pages: 186
Item Description
Job Poll Interval Specifies the time interval (seconds) that the HP Jetdirect print server will wait to check for print
jobs in a print queue.
PJL Configuration For Printer Job Language (PJL) parameters, enable (check) or disable (clear) the parameters
provided:
●
Banner Page (for printing separator pages between print jobs)
●
End-Of-Job Notification (if received from the printer, an end-of-job message will be
forwarded to a client application)
●
Toner Low Notification (if received from the printer, the HP Jetdirect print server will
forward a “toner low” message to a client application)
AppleTalk
The AppleTalk tab allows you to configure selected AppleTalk settings on the HP Jetdirect print server.
See
Table 4-10 AppleTalk Settings for a description of items on this page.
NOTE The AppleTalk parameters displayed include the AppleTalk printer types that are
advertised on the network.
The HP Jetdirect print server supports AppleTalk Phase 2 only.
Table 4-10 AppleTalk Settings
Item Description
AppleTalk Enable checkbox Enable (check) or disable (clear) the AppleTalk protocol on the print server. If AppleTalk is
enabled, AppleTalk parameters stored on the print server are displayed.
AppleTalk Name Specify the name of the printer on the AppleTalk network. If you enter a name that is already
assigned on your network, the AppleTalk name specified on the Jetdirect configuration page
will be followed by a number to indicate that it is a duplicate.
Type Identify the type of printer being advertised on the network. Up to two types can be displayed
(for example, HP LaserJet and LaserWriter).
Zone Select an available AppleTalk network zone for the printer. By default, the zone currently
selected will be displayed.
Click the Refresh selected zone Info button to refresh the list of available zones.
DLC/LLC
Using the checkbox provided, you can enable (check) or disable (clear) the DLC/LLC (Data Link Control/
Logical Link Control) protocols on the HP Jetdirect print server. If the checkbox is clear, DLC/LLC
protocols are disabled.
SNMP
You can specify or change the SNMP (Simple Network Management Protocol) parameters provided.
See
Table 4-11 SNMP Settings.
Table 4-9 IPX/SPX Settings (continued)
74 Chapter 4 HP Jetdirect Embedded Web Server (V.34.xx) ENWW