Amana High Capacity Room Air Conditioner Installation Instructions
Download Installation instructions of Amana High Capacity Room Air Conditioner Air Conditioner for Free or View it Online on All-Guides.com.
Brand: Amana
Category: Air Conditioner
Type: Installation instructions for Amana High Capacity Room Air Conditioner
Pages: 2
Download Amana High Capacity Room Air Conditioner Installation instructions
1
2
Introduction
Amana High Capacity Room Air Conditioners can be
installed through a wall or in a window. Window
installations require an Instant Mount Mounting Kit (model
number RAWK2). Window mounting kits are available at
(or through) Authorized Amana Dealers.
This instruction sheet provides guidelines for installing air
conditioner through an outside wall.
CAUTION
!
Installing air conditioner through a wall requires
extensive carpentry and/or masonry experience.
Through wall installations performed by inexperienced
or unqualified individuals can result in costly damage
to home.
Air Conditioner Dimensions
The following figures show the outside dimensions of air
conditioner with chassis installed, and dimensions of outer
case with chassis removed. Dimensions shown are with
the top rail removed (bottom rail on case is permanently
attached and is included in height dimensions).
31¼"
26¾"
Air Conditioner Dimensions
(with chassis installed)
Thru-wall Installation Instructions
for Amana High Capacity Room Air Conditioner
June 1998
25
3
/
8
"
28½"
14¾
17
3
/
16
"
19½"
Outer Case Dimensions
(chassis removed)
General Instructions
All Amana High Capacity Room Air Conditioners feature a
slide-out chassis. Chassis must be removed from outer
case for installation.
A finished opening 25
7
/8-inches wide x 20-inches high is
recommended (this provides a finished opening ¼-inch
larger than the outer case on all sides). The lower left
inside corner of opening must be within 5 feet of an
appropriate electrical outlet (see Use and Care manual for
air conditioner electrical requirements.)
Install outer case with a
3
/8-inch slope to the outside to
ensure proper condensate drainage. Caulk completely
around outside of unit to ensure it is properly sealed.
Depending upon wall construction and opening location, a
lintel (not included) may be required.
Outer case must extend into room at least ¾-inch beyond
inside wall to properly seat and attach air conditioner front
frame. If finished opening is framed by decorative molding
or other material, outer case must extend ¾-inch beyond
molding.
When wall thickness exceeds 14 inches, opening must be
modified to allow air to enter side louvers on case (see
special instructions on back ). Do not install air conditioner
in walls thicker than 17-inches.