©2006 Maytag Services 16023463 A–9
Display and Features (cont’d)
START Pad
Press the START
pad to restart a
cooking cycle that
was interrupted.
STOP/RESET
Pad
The STOP/RESET
pad stops a cooking sequence in
progress, and can clear out any
remaining time. The first time STOP/
RESET is pressed, it will pause the
current cooking cycle. The second
time STOP/RESET is pressed, the
remaining time will be cleared from
the oven.
Cooking Display
DISPLAYS DESCRIPTION
PREHEAT
READY
PREHEAT READY displays when oven has
reached preheat temperature and is ready to cook.
00:00
Displays cooking time. If stage cooking is
programmed, total cooking time is displayed.
PREHEAT
NOT READY
PREHEAT NOT READY displays with NOT flashing
when oven is turned on and warming to preheat temp.
(475°F factory default preheat setting or 450°F)
COOK
LEVEL
COOK LEVEL displays the current microwave
power level. HI is the highest setting, and 0 is lowest
(no microwave energy used).
ITEM
ITEM displays the single or double digit entry of a
cooking program when using a programmed pad.
ITEM also flashes when a cooking condition can be
started or programmed.
STG
STG displays with a single number. This is the stage
the oven is at in the cooking program.
STANDBY
STANDBY displays when the oven is plugged in,
and turned off.
C M
C M displays when oven is convection cooking.
C M
C M displays when oven is cooking using both
microwave energy and convection.
POWER
POWER displays during active microwave energy in the
oven. POWER will not display when power setting is at
0; and POWER will turn on and off when microwave
energy is set at less than HI.
CLEAN
FILTR
Displays every 7 days after start up of oven. Will
disappear after 24 hours. This is to remind you to clean
the filter.
HTR
Displays when changing heater setting. Press and hold
TEMP ENTRY to display (in programming mode).
FAN
Displays when changing fan setting. Press and hold
POWER LEVEL to display (in programming mode).