Extron electronics CC AAP Series User's Manual

Download Operation & user’s manual of Extron electronics CC AAP Series Switch for Free or View it Online on All-Guides.com. This version of Extron electronics CC AAP Series Manual compatible with such list of devices, as: RGB 580xi CC, RGB 580xi CCS AAP, RGB 580xi CCSI AAP, RGB 580xi AAP, RGB 580xi S AAP

Extron electronics CC AAP Series Operation & user’s manual - Page 1
1
Extron electronics CC AAP Series Operation & user’s manual - Page 2
2
Extron electronics CC AAP Series Operation & user’s manual - Page 3
3
Extron electronics CC AAP Series Operation & user’s manual - Page 4
4
Users Guide
RGB 580
xixi
xixi
xi AAP • Installation and Operation
Installation and Operation
RGB 580
xixi
xixi
xi AAP • Installation and Operation
Installation and Operation
32
© 2006 Extron Electronics. All rights reserved.
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500
Fax 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664
Extron Electronics, Japan
Kyodo Building
16 Ichibancho
Chiyoda-ku, Tokyo 102-0082 Japan
+81.3.3511.7655
Fax +81.3.3511.7656
www.extron.com
RGB 580
xixi
xixi
xi AAP, RGB 580
xixi
xixi
xi S/CCS AAP,
RGB 580
xixi
xixi
xi SI/CCSI AAP
68-537-01 Rev. C
03 06
RGB 580
xixi
xixi
xi
AAP/CC AAP Series
Extron’s RGB 580xi AAP double-space devices are designed to
complement the RGB 580xi remote interface. They may be
mounted to any Extron product which has an AAP faceplate or to
an AAP wallplate. See the “AAP Device Part Numbers” and the
“Cable Cubby AAP Device Part Numbers” sections for AAP/CC
AAP part numbers.
RGB 580
xixi
xixi
xi AAP/CC AAP Series Features
SHIFT
COMPUTER IN
SELECT
AUDIO IN
RGB 580xi
SHIFT
COMPUTER IN
AUDIO IN
RGB 580xi
COMPUTER IN
AUDIO IN
RGB 580xi
1
1
1
5
2
2
3
33
4
4
RGB 580xi AAP
RGB 580xi S AAP
RGB 580xi SI AAP
2
INPUT
SELECT
SHIFT
SHIFT
RGB 580xi
RGB 580xi
4
1
4
5
1
RGB 580xi CCS AAP
RGB 580xi CCSI AAP
1
Power/signal LED — This LED lights
amber to indicate that the AAP device is receiving
power.
green to indicate that an active sync signal is present at
the input and the AAP device is receiving power.
The LED will flash green whenever the minimum and
maximum limits of the horizontal shift control (H. shift)
have been reached.
2
Computer video input connector — Attach a cable from
the computer source to this 15-pin HD female connector.
3
Audio input connector — Plug a 3.5 mm stereo plug into
this jack for unbalanced audio input. Wire the male plug as
shown in the following illustration.
Audio input wiring
4
Horizontal shift control knob — While viewing the
displayed image, rotate this control to move the image to
the right or left on the screen. The power/signal LED will
flash green whenever the minimum and maximum limits
of this control are reached.
5
Input select button — Pressing this button will result in
contact closure between pins A and B of the contact closure
control connector on the front panel of the RGB 580xi
remote interface. This button can also be used for direct
control of any Extron contact closure-controlled switcher,
or as a direct connection to an external control system.
Mounting the RGB 580
xixi
xixi
xi AAP Device
The AAP device should be cabled before attaching the AAP
device to a faceplate or wallplate. The screws needed for
installing an AAP device are built into its front panel, so no
additional screws will be needed.
CAUTION
Installation and service must be performed by
authorized personnel only.
1. Connect the output cables to the AAP device’s rear
connectors. See the section “Cabling the AAP/Cable Cubby
AAP Device Rear Connectors” in this user’s guide.
2. Insert the AAP device’s screws through the holes in the AAP
double-space faceplate, the AAP wallplate, or the Cable
Cubby AAP shelf bracket. Secure the AAP device to the
faceplate/wallplate/shelf bracket with the provided captive
washers and #4-40 nuts.
Tip (L) Sleeve (GND)
Tip (L)
Ring (R)
Sleeve (GND)
Video input — RGB 580
xixi
xixi
xi
AAP / CCS AAP / CCSI AAP
Number/signal type .......................... 1 analog RGBHV, RGBS, RGsB, RsGsBs
Connectors ........................................... 1 15-pin HD female
Video output — RGB 580
xixi
xixi
xi
AAP / CCS AAP / CCSI AAP
Number/signal type .......................... 1 analog RGBHV, RGBS, RGsB
Connectors ........................................... 1 15-pin HD female
General
Temperature/humidity ..................... Storage -40° to +158°F (-40° to +70°C) / 10%
to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) / 10%
to 90%, non-condensing
Enclosure dimensions
RGB 580xi AAP/Cable Cubby AAP models (double-height plates)
Faceplate ................................ 1.4" H x 3.5" W (3.6 cm H x 8.9 cm W)
Circuit board ......................... 1.3" H x 2.5" W x 0.9" D
(3.3 cm H x 6.4 cm W x 2.3 cm D) Depth
excludes connectors and knobs.
Shipping weight .................................. AAP models . 1 lb (0.5 kg)
Vibration .............................................. ISTA/NSTA 1A in carton (International Safe
Transit Association)
Approvals ............................................ UL, CUL, CE, FCC Class A
MTBF .................................................... 30,000 hours
Warranty .............................................. 3 years parts and labor
Specifications are subject to change without notice.
Specifications