• Home
• Brands
• Radio Shack Manuals
• Radio Shack ACCURIAN 15-1937
• Radio Shack ACCURIAN 15-1937 User Manual

Radio Shack ACCURIAN 15-1937 User Manual

Download Operation & user’s manual of Radio Shack ACCURIAN 15-1937 Cooktop for Free or View it Online on All-Guides.com.

1

2

Please read this user’s guide before

installing, setting up and using your new product

www.radioshack.com

Networked Home

Entertainment System

PowerLine Digital Audio Sender

Includes Sender and Power cord.

PowerLine Digital Audio Receiver/Amplifi er

Includes Receiver/Amplifi er and Power cord.

PowerLine Amplifi ed Receiver/ Speaker System

Includes Amplifi ed Receiver/Speaker, Satellite Speaker,

Speaker Wire, and Power cord.

Thank you for buying the RadioShack Networked Home Entertainment

System. Now you can send high-quality digital stereo audio to any

room in your home that has an AC outlet, without running cable. This

system uses the existing AC electrical wiring in your home to send

digital signals.

1. Power off all system devices before making any connections.

2. Connect a matching set of speakers (8 ohms) to the Amplifi er /

Receiver's SPEAKER OUT.

Or, connect stereo audio cables from the Amplifi er / Receiver's LINE

OUT to the line level inputs on your A/V receiver. (Match LEFT to L and

RIGHT to R).

3. Insert the AC power cord’s female plug end into the Amplifi er /

Receiver's POWER jack, and then plug the AC cord’s other end into a

standard AC outlet.

LINE OUT POWERSPEAKER OUT

Amplifi er / Receiver Rear View

15-1938

40-1462

15-1937

1. Split apart about 4 inches (10.16 cm) of speaker wire on

each end. Then use a wire stripper to strip

1

/2 in. (1.27 cm)

of insulation from each wire’s end.

2. Connect one end of the wire to SPEAKER OUT on the

Amplifi ed Receiver / Speaker. (Be sure to match the

polarity of the wires when making your connection.)

3. Connect the other end to the satellite speaker. Be sure to

correctly match polarity.

4. Insert the AC power cord’s female plug end into the

receiver/speaker’s AC IN jack, and then plug the AC cord’s

other end into a standard AC outlet.

Speaker Settings

• The default setting for your amplifi ed speaker is stereo (S). If you connect two pairs of the 40-1462, you must set one to left (L)

and one to right (R).

• If you use a single Amplifi ed Receiver / Speaker, set LRMS to mono (M).

Amplifi ed Receiver / Speaker’s Rear View

Sattelite Speaker’s Rear

View

SPEAKER OUT AC IN L R M S

1. Make certain that your audio source is powered off.

2. Connect the line level stereo outputs from the audio source, such

as a CD player to the sender's AUDIO IN. Match LEFT to L and

RIGHT to R.

Or,

Connect the surround or speaker outputs from your Home Theater

System or A/V receiver to the sender's SPEAKER IN.

DO NOT connect both cables to the sender's AUDIO IN and

SPEAKER IN.

3. Connect the AC power cord’s female plug end into AC IN, and

then plug the AC cord’s other end into a standard AC outlet.

4. Turn on the audio source, and then press the POWER button on

your sender.

Your sender’s Audio Input Level Lo/Hi is preset to Lo. If you hear

volume distortion, adjust the Audio Input Level Lo/Hi to Hi.

SPEAKER IN

AUDIO IN AC IN

Sender Rear View

VOLUME

BALANCE

BASS

TREBLE

POWER

POWER

VOLUME BALANCE

BASS

TREBLE

All items shown below are sold separately. 15-1938 is

required for the PowerLine system to work.

Audio Input

Level Lo/Hi

CD Player

1. Connect an audio source to your PowerLine

sender and plug into any AC outlet.

2. Connect PowerLine speakers to any AC outlet

in your home,

OR, Connect a PowerLine receiver to any AC

outlet in your home, and then connect to it, either

A) ...an audio source with speakers, or

B) ...non-PowerLine speakers.

Line In

Connection

Speaker In

Connection

Receiver

S

igna

l

P

ath

OR

Simply plug the audio outputs of any component – such as an A/V receiver, CD, or MP3 player – into the audio

inputs of the sender (#15-1938) and plug the sender into an AC outlet. Then, plug RadioShack PowerLine Digital

Receiver/Speakers (# 40-1462) into any electrical outlet in your home. If you have your own speakers, just plug

your RadioShack PowerLine Digital Audio Receiver/Amplifi er (# 15-1937) into any electrical outlet and connect

your speakers. Using this receiver, you can control the volume, balance, bass and treble of your remote speakers.

Best of all, the RadioShack Networked Home Entertainment System is completely portable.

OR

AB

Power

Note: Do not use two senders in the same place.

Line Out

Speaker Out