SynOptics 3395 Reference Manual

Download Command reference of SynOptics 3395 Recording Equipment for Free or View it Online on All-Guides.com.

SynOptics 3395 Command reference - Page 1
1
SynOptics 3395 Command reference - Page 2
2
Commands Reference Card
for the Model 3395/3395A
UNIX Operating System-like
Interface
See Using the Model 3395/3395A UNIX Operating
System-like Interface for detailed information about
these commands.
The commands described with an asterisk (*) require
superuser mode. (See the su command.)
Command Description
alias [name [word-
list]]
Create and display command
aliases.
arp -a | ip-addr | -d
ip-addr* | -s ip-addr
ethernet-addr*
Display, delete, or create
entries in the Internet-to-
Ethernet translation table.
boot* [-o]
[minutes] | -c | -d
Initialize the terminal server.
connect [service[-n
node-name]
[-d dest-name]]
Establish a job with a LAT
service.
connect [rhost [-p
telnet
-
port-number]]
Establish a job with a Telnet
destination.
dli [cmd] Open the Model 3395
command interface from the
ULI, and execute a Model 3395
command.
exit Terminate the ULI or disable
superuser mode.
fg [%] | [%]job |
host-name
Reopen a job.
help [cmd[cmd]]
?
Display information about
commands and keywords.
history [n] [-r [n]]
[-h [n]]
Display a list of ULI events at
your port.
hosts Display a list of available
domain names.
ifconfig -a |
interface [ip-addr]
[netmask net-mask]
[broadcast bip-
addr] *
Display and configure network
parameters.
jobs Display a list of currently
active jobs.
kill [%] | [%]job |
-a
Terminate one or more jobs.
lock Temporarily suspend access to
a port.
logout [-p port#] Terminate all jobs and log out
the port. (Only users at
superuser ports can log out
other ports.)
lpc* ? | help |
abort | clean |
create [-p
ports][args] |
delete | disable |
enable | exit |
quit | status
Manage line printers.
lpq -Pprinter
[job
#
...]
Display the contents of a
printer queue.
lprm* -Pprinter job#.
. .
Remove one or more entries
from the printer queue.
netstat [-n] |
-a[n] | -i[n] |
-I[n] [interface] |
-r[n] | -s[n]
Display network statistics
collected by the
communications server.
ping* [-l] rhost Use ICMP to generate a
response from a host.
ppp + Enable the Point-to-Point
Protocol (PPP).
queues [-a] |
-h host-name |
-s service-name |
-p port-number |
-e entry
Display the service connection
queue.
rlogin rhost
[-l username]
Use the Rlogin protocol to
establish a job with a remote
host.
services
-c[service-name] |
-s[service-name] |
-S[service-name]
Display information about
LAT services.
set
[history=n] |
[ignoreeof=cnt] |
[prompt="string"]
Change and display the values
of the ULI variables.
slip +[c] Enable the SLIP or CSLIP
protocol.
source
/pathname/script-
name
Execute a script file.
stty [-a] | option Set and display port parameters
that control terminal
characteristics.
su [password] Gain access to superuser mode.
(Authorized users only)
telnet rhost
[telnet-port-number]
Use the Telnet protocol to
establish a job at a Telnet
destination.
tn3270 rhost
[telnet-port-number]
Use the Telnet protocol to
provide 3270 access to an IBM
host.
unalias name Delete the alias you specify.
unset history |
ignoreeof | prompt
Reset the values of ULI
variables to their default
values.
who [am i]
whoami
Display the names and port
numbers of all users on the
terminal server, or the current
user.
xremote [rhost] Establish an Xremote session.